
	Where results make sense

Topic: Arrestor cable

Related Topics

Arrestor wires

Angled flight deck

Aircraft catapult

Landing craft

Amphibious transport dock

Supercarrier

Amphibious

WWII

Amphibian vehicle

	Cisco Aironet Lightning Arrestor (AIR-ACC245LA-R) (Site not responding. Last check: 2007-10-16)
		This lightning arrestor is designed to be installed between the antenna cable that is attached to an outdoor antenna and the Cisco Aironet wireless device.
		Ground the lightning arrestor by using a heavy wire (#6 solid copper) and connect the ground wire to a good ground on the structural steel or electrical panel.
		The cable should be kept as short as possible because cable length also determines the amount of signal loss (the longer the run, the greater the loss).
	www.cisco.com /univercd/cc/td/doc/product/wireless/acessory/hslar.htm (588 words)

	Patent 5936825: Rise pole termination/arrestor combination
		Protection of a cable, its termination and other apparatus from lightning strikes on an overhead line is provided by housing a surge arrestor and a cable termination, which are connected in parallel in a common housing, but as separate components not sharing the same axial line.
		The cable 32 and the surge arrestor 33 are connected together by a ground connector 34 and an arrestor/cable connector 35.
		Between the spring loaded connector 34.sub.1 and the surge arrestor 33 is a conductive material such as a metal rod threadingly engaging the hold plate 33.sub.5 and a lower portion of the housing 31 by means of a connector bolt 34.sub.2.
	www.freepatentsonline.com /5936825.html (3270 words)

	Answers to questions about running network cable outsideof a building.
		The distances the cable would be run is pretty short, 10-15' probably, if I was forced to run them through the apartment, it would at least quadruple the amount of cable I would need, due to the nature of the apartment layout.
		The lightning arrestor on the TV cable going to my house was installed last week and looks somewhat like a bracket.
		I just installed a CAT 5E cable running about 130 ft though my house, from a small punch-down block near where the phone lines come into the house to a wall plate with four RJ-11 jacks screwed to the (wooden) wall, in my new office/shop, for the three phone lines we presently have installed.
	www.duxcw.com /faq/network/outside.htm (1545 words)

	Patent 5206780: Cable termination
		The invention relates to high voltage surge arrestors which are installed in parallel with an electric apparatus to be protected from excessive high voltages, such as a high voltage power cable or a transformer.
		The present invention relates to high voltage surge arrestors which are installed in parallel with an electric apparatus to be protected from excessive high voltages, such as a high voltage power cable or a transformer.
		The combined voltage surge arrestor and cable termination can be preassembled and mounted at a desired position, for instance at the top of an overhead line pole or at some other suitable place, before inserting the prepared cable end through its hollow.
	www.freepatentsonline.com /5206780.html (1736 words)

	Special Publications \| Technical Publication #33
		If large currents of a fast rising nature are presented to the arrestor in such a way that a back-EMF develops across the inductor then the companion paralleled gas discharge unit ignites, but its only workload is to collapse the magnetic field of the inductor.
		The result is an arrestor whose gas unit undertakes such a low workload that is will probably last forever.
		The added resistance on the equipment side of the arrestor was inserted to provide a similar drain function on the user side of the arrestor.
	www.arraysolutions.com /Products/ice/33.htm (488 words)

	Impulse Suppresors \| Arrestors (Site not responding. Last check: 2007-10-16)
		Our arrestors can be found in the most stark surroundings, from dense African jungles to the vast wastelands of some of the world's most punishing deserts.
		Arrestor units may be placed anywhere in the feedline at ground level without serious change in tuning, but small change may be detectable due "to small" increase in total feedline length caused by size of arrestor case and circuit.
		Cable companies offer little, if any, lightning protection and are not responsible for resultant damage when it occurs.
	www.arraysolutions.com /Products/ice/impulse1.html (1366 words)

	Impulse Suppresors \| Arrestors
		Our arrestors can be found in the most stark surroundings, from dense African jungles to the vast wastelands of some of the world's most punishing deserts.
		Arrestor units may be placed anywhere in the feedline at ground level without serious change in tuning, but small change may be detectable due "to small" increase in total feedline length caused by size of arrestor case and circuit.
		Cable companies offer little, if any, lightning protection and are not responsible for resultant damage when it occurs.
	www.iceradioproducts.com /impulse1.html (1384 words)

	Mine Field Breaching in Desert Storm, by Thomas Houlahan (5.3) (Site not responding. Last check: 2007-10-16)
		On some of these MiCLiCs, the fuses failed, on others, the arrestor cable snapped, its connection to the tank or AAV was severed and the ability to command detonate was lost.
		Seven line charges either landed off line or snapped their arrestor cables and flew into the mine field, where combat engineers could not reach them.
		Cables could also be damaged as a tank negotiated rugged terrain.
	maic.jmu.edu /journal/5.3/focus/thomas_houlihan/thomas_houlihan.htm (3472 words)

	Lighting Arrestor (Site not responding. Last check: 2007-10-16)
		Arrestor wires 1: '''Arrestor wires''' are thick steel cables fitted to the aft
		Aircraft carrier 14: aircraft do not require catapult facilities or arrestor cable s to be deployed across the flight deck.
		78: landing area because its landing hook missed the arrestor cables.
	www.witchware.com /File/29876-Lighting.Arrestor.Html (574 words)

	broadband help » Forums » Wireless Service Providers » Climbing Lanyards
		Falling into a straight rope-type lanyard without a fall arrestor on it will be very very painful and it is not their intended purpose.
		If you are not using the cable brake, you can use the ring to hold a wrench or something with a cheap carabiner.
		Arrestors are ment to go on the back ring so you fall straight.
	www.dslreports.com /forum/remark,17381851 (2219 words)

	TrueValue.com
		While a high-quality point-of-use suppressor may adequately protect a device plugged in it, a surge arrestor at the service entrance provides a level of protection for your entire house, including large appliances that cannot be protected with point-of-use devices.
		Electric, phone, cable, satellite, and antenna systems must all be connected to a ground rod.
		Connect phone and cable lines from the service provider's exterior interface to the "in" terminals on the surge protector, and connect the house phone and cable wiring to the "out" terminals.
	www.truevalue.com /content/projects/ContentView.aspx?sec_id=8&subsec_id=46&con_id=1082 (650 words)

	Rain Bird
		The Surge Arrestor shall have female type N connectors and grounding stud with a nut for connection of a ground wire.
		Route the cable down the mast and the side of the building or tower attaching the cable securely with approved type standoff insulators.
		Connect the cable to the female N connector marked "Antenna" on the PolyPhaser Surge Arrestor.
	www.rainbird.com /golfspecifier/spec_freedom.htm (1202 words)

	Vertical monopole antenna for HF
		Although a lightning arrestor can be easily made using a gas discharge tube, I used a Model 300 HF arrestor from Industrial Communication Engineers, Ltd. The metal case is grounded using four lengths of heavy copper antenna wire twisted together to make a heavy cable 7 mm in diameter.
		This cable was silver-soldered to a grounding rod, taking care that the total cable length was less than one foot.
		For some reason the arrestor is not waterproof; so I sealed the transformer and arrestor in a small watertight aluminum box.
	entropy.brneurosci.org /antenna.html (2206 words)

	Torque arrestors, safety rope, and deluxe pump wire cable guards, all necessary items for installing a pump.
		Deluxe torque arrestor installs directly above the pump on the water discharge pipe, to keep the submersible pump centered in the well casing.
		Tighten the top clamp in place, and the torque arrestor is ready to keep your pump centered, while stopping the torque movement that could cause damage to your pump wire.
		You can use this deluxe torque arrestor on 1" and 1-1/4" drop pipe, and it is suitable for use in wells 4" ID up through 8" well casing.
	www.deanbennett.com /misc-well-accessories.htm (312 words)

	Antennas, Lightning Surge Arrestor, Coaxial Antenna Cable (Site not responding. Last check: 2007-10-16)
		Key elements to receiving good signals from the NWS transmitters are a good quality antenna, placed as high as possible, a lightning surge arrestor to limit lightning strikes from destroying the receiver, and high quality coaxial antenna cable to bring the signal from the antenna to the receiver.
		We sell high quality, low loss coaxial cable HPF240 which is similar to LMR-240 with the following specs.059 center conductor with micro-cell foam dielectric and type IIIA non-contaminating jacket.
		The cables are professionally terminated with PL-259 connectors for plug and play installation.
	www.thuneagle.com /antenna.html (153 words)

	16 Foot Cable Self Retracting Lifeline (Site not responding. Last check: 2007-10-16)
		This S.R.L. features a durable composite plasic housing and a 16 Foot cable.The Arrestor series of Self Retracting Lifelines are durable, fast acting personal fall arrestors providing limited fall and deceleration distances and reduced fall arrest forces.
		It is equipped with a fall indicator at the snap hook to give a quick and accurate assessment during inspection.
		The Arrestor 2000 series is supplied complete with locking snap hook and mounting carabiner.
	www.fall-safe.com /srl16plasticcable.html (209 words)

	Blackburn Buccaneer RAF / RN stories from the Air crew Crew Room from Gp Cpt Tom Eeles
		When we climbed down we saw that the arrestor cable was wrapped around the nosewheel leg and the whole thing was stretched tight like a giant catapult; it appeared to be about to launch our Buccaneer backwards down the runway towards our Nos 2 and 3.
		Lying in the grass beside the runway was found the mangled remains of a metal stand that the crash crews used to hold the arrestor cable about 3 feet above runway to allow them to move the rubber grommets easily when rigging the cable into the up position.
		Whilst re-rigging the cable after the arrival of the VlP's Andover the night before, they were hassled by ATC to hurry up and clear off the runway - as our formation was taxiing and in their haste they forgot to remove the stand!
	ourworld.compuserve.com /homepages/andrewbrooks1/Teeles1.htm (693 words)

	Duraline Highway Lighting Systems
		The Fused Distribution Cable Assembly is comprised of a 3MFP10 male fused-plug on of 10/3Cable.
		The cable is molded to a two-way junction and splits into two legs of cable.
		A red female FTP-2 connector is molded to the 10/2 cable and an orange FTP-3 connector is molded to the 14/3 cable.
	www.jbn-duraline.com /duraline_products_florida.htm (290 words)

	Antenna Basics (Site not responding. Last check: 2007-10-16)
		If you install the arrestor outdoors, ground the arrestor by using a ground lug attached to the arrestor and a heavy wire (#6 solid copper) and connect the lug to a good earth ground.
		If you install the arrestor indoors, place the wireless LAN device near a good source of ground, such as structural steel or the ground on an electrical panel, and ground the arrestor using one of those grounds.
		Figure 1 shows the connectors on the arrestor and the proper placement of the ground lug.
	www.cisco.com /univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brhig/br350apc.htm (1397 words)

	An Arresting Application Makes Airport Cable-Ready (Site not responding. Last check: 2007-10-16)
		In the event of an aborted take-off, overshoot on landing, or brake failure, a cable stretched across either end of the runway is designed to be snagged by an arrestor hook on the tail end of the aircraft.
		When it is not in use, the cable is normally held down in a groove in the runway by a hydraulic mechanism.
		It wouldn’t be healthy for a vehicle or other light airplane to hit the cable, so a switch in the control tower allows the cable to be raised or lowered as needed.
	www.zetron.com /pages/english/realw/7041.html (781 words)

	Netgear Forums :: View topic - Antenna Cable Specifications for WG302 (Site not responding. Last check: 2007-10-16)
		Netgear actually supply the cables themselves, so if you get those, should be okay, but don't know if you will be able to use the Netgear cable without the lightning arrestor.
		The "Netgear low-loss antenna cable" (sold separately) is suitable for use between the arrestor and the access point, but can not (maybe for security reasons) directly connect to the antenna.
		At the end you have two cables and one lightning arrestor between the AP and the antenna.
	forum1.netgear.com /support/viewtopic.php?t=819 (443 words)

	Arrestor cable Definition / Arrestor cable Research (Site not responding. Last check: 2007-10-16)
		Arrestor wires are thick steel cables fitted to the aft end of the flight deck on CTOL Conventional Take-off and Landing is the process whereby conventional aircraft (such as passenger aircraft) take off and land, involving the use of runways.
		The aircraft will taxi along the runway until its rotation speed is reached, then climb into the air.
		When caught, the wire takes up the slack before pulling taut, bring the aeroplaneFixed-wing aircraft is a term used to refer to what are further commonly known as aeroplanes in Commonwealth English (excluding Canada), airplanes in North American English.
	www.elresearch.com /Arrestor_cable (288 words)

	♠ WiFi Accessories \| Lightning Arrestor
		These lightning arrestors are gas discharge type surge suppressors for a quick response to electrical surges.
		These lightning arrestors come with an included wire lug for connecting a copper ground wire between the surge suppressor housing and a solid ground (pole, tower, etc.)
		The bulkhead style is designed to be mounted to a solid surface, the inline style is designed to be mounted inline between two cable connections.
	www.radiolabs.com /products/antennas/accessories/lightning-protection.php (350 words)

	Installation Instructions - Lightning Rod Parts
		The arrestor clamps the surge faster than the breaker can trip - therefore, even if the breaker trips, the arrester will already have done it's job.
		The WHOLE HOUSE ARRESTOR will re-set automatically and keep on working for many years.
		Note: If there are no "knockouts" on your electrical box you may install the Arrestor on the inside of the electrical box, in any position.
	www.lightningrodparts.com /instructions.html (204 words)

	Electric Supplies - Lightning Protection - Ground Rods - Underground Cable
		If you hear a clicking in the arrestor when the fencer is running, either the arrestor needs to be replaced or the charger's voltage is too high.
		This can be used like a lightning arrestor by hooking one wire to an independent ground rod and the other to the electrified fence wire.
		Undergound cable can also be used to connect ground rods but keep the connection (bare galvanized steel wire) above ground so it doesn't rust away quickly.
	www.kencove.com /elecs.htm (2356 words)

	cheaper lunar landings - Forums powered by UBBThreads™ (Site not responding. Last check: 2007-10-16)
		The elastic shock absorbing cable doesn't really have to be a rubber band, it is just there in recognition that there has to be an elastic element to oversome the shock of engaging the arrestor wire.
		Arrestor wire isn't a tight catch wire like on an aircraft carrier it is simply the main element for transfer of KE from the payload to the surface of the moon.
		Be it linear accelerators, arrestor wires, or dust, it should be doable.
	uplink.space.com /showflat.php?Board=businesstech&Number=370844 (1648 words)

	[No title]
		Cable Compression Connectors Screw-in nylon conduit fittings with tapered rubber grommet around cable and compression lock nut to compress grommet around cable.
		The BUP series utilizes 5-pin protector modules housed in a sealed chamber-within-achamber for maximum environmental protection, which is especially important for outdoor applications.
		Output connections shall be screw down binding posts for all 25 pairs inside enclosure Input connections shall be stub cable wire wrapped and potted to back of 5 pin socket module.
	www.fs.fed.us /database/acad/csispecs/16115.doc (4375 words)

	lightning arrestor (Site not responding. Last check: 2007-10-16)
		It is very good practice to use a lightning arrestor to protect your HVI from direct lightning...
		We have been told that we are the greatest option of places on the world wide web for lightning arrestor, accessories for lightning arrestor, services for lightning arrestor, and all other needs involving or related to lightning arrestor.
		If you have different or more information that you think we need to know about lightning arrestor go ahead and let us know and be sure to label your comments with the proper title of lightning arrestor.
	www.protectlifehere.com /lightningarrestor (1270 words)

	installation [MIT Roofnet]
		The cable: Drop the cable down the side of your house – feel free to flex it, but don’t bend it all the way back.
		Connect the fl cable to the “pigtail” (the thing hanging off the node), and plug the power supply cable into the computer.
		Connect the arrestor to a water pipe or otherwise well known source of ground (important!).
	pdos.csail.mit.edu /roofnet/doku.php?id=installation (440 words)

	Lock 3, Welland Canal, Ontario, Canada (Site not responding. Last check: 2007-10-16)
		The arrester boom in this case lifts the cable out of the way, as the lock is about to be drained to allow a ship to enter from the lower level (i.e.
		The procedure for the CSL Niagara and others her size differs in that when the vessel enters the lock, she stops 5 meters from the ship arrestor cable, then her 4 mooring lines are secured.
		The ship arrestor cable is then lifted and the ship winches herself forward about 8 more meters while the lock personnel give position reports to the captain watching the stern of the vessel.
	strickland.ca /lock3 (1223 words)

Try your search on: Qwika (all wikis)