
	Where results make sense

Topic: Cunife

In the News (Tue 14 Feb 12)

EXECUTIVE POWER

Iran

ANALYSIS

Pakistan

Family compact

	Optical isolator comprising a faraday rotator - Patent 6480636 (Site not responding. Last check: 2007-10-29)
		The isolator casing comprising one of the Fe--Cr--Co magnet, the Cunife magnet, the Pt alloy magnet, and the Cunico magnet may be used as a holder for holding the optical elements including the Faraday rotator and the polarizing elements.
		The optical element assembly 10 was received at the center of an inner bore or a cavity of a Cunife magnet 15 having a cylindrical shape and serving as both of a field-application magnet and an isolator casing.
		Thereafter, the optical element assembly 10 was received in an inner bore or a cavity of a Cunife magnet 16 having a cylindrical shape and serving as a field-application magnet and an isolator casing.
	www.freepatentsonline.com /6480636.html (12298 words)

	CUNiFer Alloy materials for marine constructons - Boat Design Forums
		CuNiFer Alloys (copper/nickel) have many advantages as material for building hulls, rudders and any other wetted part of seawater exposed of boat.
		CuNiFe = 86/66-10/30-x-x coppernickel (mostly tubing) or Nickle Aluminum Bronze or Manganeze Bronze.
		But for the life of me, I can't recall any hulls built with totaly CuNi or CuNiFe plating, it would be almost impossible to weld without major distortion (much like Al but worse).
	www.boatdesign.net /forum/showthread.php?t=8848&goto=nextoldest (500 words)

	Starting my Jazzblaster project
		The WRHP was designed in 1970 by Seth Lover — inventor of the original PAF humbucker for Gibson in the '50s — and was made with Cunife (Copper/Nickel/Ferrite, as opposed to Alnico) polepieces which were magnetized themselves instead of having a one-piece bar magnet underneath like the PAF.
		Cunife was chosen mainly because it was both magnetic and soft enough for threading.
		The CuNiFe magnets were threaded and slotted to function and resemble the adjustable screw type poles of a Gibson humbucker.
	www.offsetguitars.com /forums/index.php?topic=85.15 (1687 words)

	Cunife
		Encyclopedia : C : CU : CUN : Cunife
		Cunife 1 consists of 60% Cu, 20% Ni, and 20% Fe.
		Cunife 2 consists of 60% Cu, 20% Ni, 2.5% Co, and 17.5% Fe.
	encycl.opentopia.com /term/Cunife (118 words)

	Geberit Marketing e Distribuzione SA - Cunife
		Mapress CuNiFe trova ideale applicazione nell’impiantistica navale perchè risolve i problemi di corrosione causata dall’acqua salmastra; il materiale resiste infatti alla sua corrosione e alle sostenze aggressive.
		I tubi e i raccordi Mapress CuNiFe sono realizzati in una lega di rame nichel e ferro e sono disponibili nei diametri da 15 a 108 mm.
		Geberit CuNiFe è adatto anche al trasporto di gas inerti (non tossici e non infiammabili come ad esempio azoto e anidride carbonica), per impianti di aria compressa fino a 16 bar, di estinzione incendio sulle navi e per la distribuzione di gasolio combustibile EL (sostituire l’O-ring standard con quello FPM-rosso).
	www.geberit.it /geberit/inet/it/wcmsit.nsf/fb2c4189deab4fccc1256de300577537/9baf76bd4bbe871ac1256fb00050d49c?OpenDocument (190 words)

	cunife (Site not responding. Last check: 2007-10-29)
		CAT.INIST Interstitialcy migration in electron irradiated CuNiFe alloys (Migration d'interstitiels dans les alliages CuNiFe irradiÃ©s par des Ã©lectrons)...
		For ALNICO magnets it is 540Â°C; for CUNIFE magnets it is 840Â°C. The...Cunife Oy Puhelin:019 335500 Fax:019 335585.
		Cunife Oy Lohjanharjuntie 1144, 08680 MUIJALA Toimiala: MaarakennustÃ¶itÃ¤, maansiirtotÃ¶itÃ¤...
	ladgao.ifrance.com /blog/cunife.html (927 words)

	The '72 Custom Club: The '72 Custom in Detail
		The WRHP was designed in 1970 by Seth Lover – inventor of the original PAF humbucker for Gibson in the '50s – and was made with Cunife (Copper/Nickel/Ferrite, as opposed to Alnico) polepieces which were magnetized themselves instead of having a one-piece bar magnet underneath like the PAF.
		Cunife was chosen mainly because it was both magnetic and soft enough for threading.
		According to Fender, using the Cunife design would have made the MIM too expensive.
	lidbjork.homelinux.org /72cc/detail.html (1258 words)

	LVDT Technology - Linear Velocity Transducer
		ALNICO is made from sintered metal, and is characterized by its high sensitivity, brittleness, plated surface, and threaded brass endcaps.
		CUNIFE is machined from bar stock, and is characterized by its lower sensitivity rating than ALNICO, ruggedness, visible draw marks, and threads directly in magnet.
		For ALNICO magnets it is 540°C; for CUNIFE magnets it is 840°C. The recommended operating ranges for these magnets are 300°C and 540°C, respectively.
	www.transtekinc.com /lvt_technology.htm (741 words)

	Magnetic Alloys - Hoskins Mfg Co
		Hoskins' Cunife is a 60% copper, 29%, nickel and 20% iron ductile permanent magnet alloy developed primarily for applications requiring close tolerance parts with strong directional magnetic properties.
		Timer motors for major applications, speedometers, aircraft instruments, electronic equipment and control systems are among the various types of products in which its strength, ductility, and high coercive force can be advantageously employed to obtain low cost per unit of useful magnetic energy.
		Moreover, because magnets made of new Hoskins Cunife require no costly finishing operations, they may be produced in a wide variety of small, intricate sizes and shapes that would be either impractical or impossible with other permanent magnet materials.
	graphicsdept.com /webdev/links/hoskins/magnetic.htm (214 words)

	New Product: Carbon-Fibre Based Pipe Repair Technique (Site not responding. Last check: 2007-10-29)
		The repair was a success, allowing the damaged section to be replaced during a scheduled shutdown six months later.
		It was the first time the technique had been used on a superalloy, but since then FDA has tackled CuNiFe too, and is confident about the suitability of its composite system for other exotic materials.
		The company is also tackling ever-large repair jobs, as recent work on a 75 metre section of main cooling line at one o Europe’s largest oil refineries proves.
	www.azom.com /details.asp?ArticleID=1488 (752 words)

	Marine Approval - Pressure Sensors, Transducers, Transmitters, Gauges, Manometers, Calibrators, Loggers, Indicators
		Marine approved pressure transmitter with 4-20mA current loop output for shipbuilding with optional all CuNiFe construction for sea-water compatibility in ranges from -1 to 600 bar gauge or absolute.
		Marine approved stainless steel diaphragm pressure transmitter with 4-20mA current loop output for shipbuilding in ranges from 100mb to 600 bar gauge or absolute.
		Marine approved level transmitter with 4-20mA current loop output for shipbuilding with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 250mH2O gauge.
	www.sensorsone.co.uk /products/100/Marine-Approval.html (402 words)

	International Magnaproducts, Inc.
		Under normal handling and use exposure to Cunife finished articles present no or few health hazards.
		When machining Cunife use coolant to reduce dusting.
		Protective goggles are recommended when working with Cunife because of the material's tendency to chip and/or break.
	www.magnetsim.com /msds/3.htm (199 words)

	Viega content
		Copper-nickel wrought alloys (CuNiFe) are highly corrosion resistant - even with high chlorination.
		The Viega press-fitting technique reduces time and costs relating to CuNiFe pipe connections and the attendant risks.
		The efficient cold press-fitting technique does away with the need for traditional practices such as soldering and welding and renders extensive fire precautions unnecessary.
	www.viega.com /servlet/PB/menu/1006476_l2_pcontent/index.html (248 words)

	26-50 - Seymour Duncan/Basslines
		The best magnetic properties for Cunife are obtained in a round wire form which has been "cold reduced" and elongated in one direction.
		The Cunife compares favorably in magnetic properties with cast Alnico 3.
		Fender plates their Cunife magnet pole piece used in their guitar and bass humbuckers.
	www.seymourduncan.com /support/faq/seymours-q-a/2650 (5182 words)

	Understanding and Using Permanent Magnets, Chapter 1
		The physical development of magnetic materials beyond magnet steels began in 1921 with the introduction of cobalt chrome steel.
		Subsequent work on alloys with nickel, aluminum, copper and platinum led to the introduction of precipitation hardened alnico (aluminum nickel cobalt) in 1935, Cunife (copper nickel iron) in 1935 and Platinum Cobalt in 1936.
		The alnico magnets were further improved in 1940 with the introduction of domain oriented alnico V that is still in frequent use today.
	www.grouparnold.com /mtc/pm_manual_chap_1.htm (1989 words)

	Frequently Asked questions
		This is done by rolling the material to very thin gauges (as low as.001") and therefore minimize the eddy current losses.
		I have many applications that use Cunife and Vicalloy.
		They can exceed the magnetic performance of Cunife, and are more price-competitive than Vicalloy.
	www.grouparnold.com /mtc/questions.htm (926 words)

	Adding Real Wide Range in 72 tele reissue - Page 4 - The Gear Page
		And a difference between alnico magnet "cores" under each string and cuNiFe.
		Aside from the fact the originals had more turns of wire, the core has more to do with it than a few extra turns.
		If I recall correctly there are similar bobbins on some oddball 70's gibsons- looks like seth lover was playing both sides- I would have to go through my photo archive to figure out which gibsons but I am pretty sure of it.
	www.thegearpage.net /board/showthread.php?p=2084952#post2084952 (1504 words)

	Fender Wide Range Humbucker PU Questions.. [Archive] - Telecaster Guitar Forum
		Those pickups were designed for Fender by Seth Lover, same guy who did the PAF's for Gibson.
		The originals were made using Cunife magnets for the threaded polepieces.
		The new Fender pu's that look like these aren't made with Cunife, they are made with alnico or ceramic bar magnets underneath ala Gibson and most other humbuckers, they sound good but have more mids and sound like a Gibson humbucker IMO.
	www.tdpri.com /forum/archive/index.php/t-31944.html (321 words)

	Understanding and Using Permanent Magnets, Chapter 1
		The physical development of magnetic materials beyond magnet steels began in 1921 with the introduction of cobalt chrome steel.
		Subsequent work on alloys with nickel, aluminum, copper and platinum led to the introduction of precipitation hardened alnico (aluminum nickel cobalt) in 1935, Cunife (copper nickel iron) in 1935 and Platinum Cobalt in 1936.
		The alnico magnets were further improved in 1940 with the introduction of domain oriented alnico V that is still in frequent use today.
	www.arnoldmagnetics.com /mtc/pm_manual_chap_1.htm (1989 words)

	Untitled (Site not responding. Last check: 2007-10-29)
		Lorowerk of Bad Gandersheim in Germany are the World Leaders in the design and manufacture of lightweight discharge piping for the Marine & Offshore Industries.
		Loro-Vac Cunife for high specification vacuum sewage systems for naval applications, which dictate the use of Copper Nickel Piping.
		The range is available in Galvanised Steel, Stainless Steel or Cunife and has full international approval certification.
	www.transvac-systems.co.uk /products/loro.htm (120 words)

	Magnetic hardening and phase segregation in CuNiFe and CuNiCo alloys (Site not responding. Last check: 2007-10-29)
		Magnetic hardening and phase segregation in CuNiFe and CuNiCo alloys
		The temperature dependence of the coercive fields in aged CuNiFe and CuNiCo has been measured between 300 K and 77 K. The results are interpreted in terms of shape anisotropy of the ferromagnetic phase of the alloys and the variation of ferromagnetic particle volume with ageing time is deduced from the results.
		An arrest of the volume increase with ageing time is attributed to the start of coherency loss between the ferromagnetic and paramagnetic phases of the alloy when the diameter of each lamellar interface is about 600 Å.
	stacks.iop.org /0022-3727/4/586 (257 words)

	Accurate Wide Range Reissues?
		My understanding of the situation is not at all that it isn't possible to obtain cunife - there are plenty of companies who will readily make you any sort of custom ingot you wish - you could specify the alloy completely, and cunife is not really high-tech stuff.
		The real problem is that it is so cost prohibitive to have custom machine parts made from custom alloys, no boutique company could afford to do it.
		I think what needs to be done is some enterprizing individual needs to discover every possible application for cunife screws, find buyers, and get a lot of screws made.
	www.offsetguitars.com /forums/index.php?topic=6425.30 (283 words)

	FDP - Forum
		I wonder if one of the sticking points though is the CuNiFe magnets used in the originals.
		I would assume that Fender would try to keep an AVRI '72 Tele as close to original specs as possible, and that would require once again producing these kind of unusual and possibly extra pricey pickups, too.
		I would say moderately priced, but enough to show that it is a USA model with superior build but affordable also.
	www.fenderforum.com /forum.html?db=&topic_number=597762&lastpost=2006-11-2014:23:35 (896 words)

	Ship Technology - LOROWERK GmbH & Co. KG - Loro-X Discharge Pipes for Shipbuilding Construction
		The pipe work in diameters ranges from DN 40 - DN 200, and is made from either hot-dip galvanised steel with additional internal coating, stainless steel or CUNIFE.
		The pipe work is assembled by locating convenient length of pipes, various fittings and deck penetrations, via a 'push-fit' socket connection with rubber sealing elements.
		With the new LORO-XVAC sealing element you can use the standard LORO-X pipes also for vacuum installation.
	www.ship-technology.com /contractors/desalination/lorowerk (641 words)

	cunife's Page on RateItAll.com
		Now In: RateItAll.com » cunife (0) Page on RateItAll.com
		Reviews from cunife's Trusted Network - What's This?
		Testimonials for cunife - Write a Testimonial about cunife
	www.rateitall.com /cunife (45 words)

	10022003Circle Net International LLC Home Page
		Circle Net is one of the well-known Master Distributor of a patented alkaline concentrate, magnetic couplings, magnetic materials in USA as well as in the world, Our distributing products include AlkaLife, CuNiFe magnets, Feller magnetic couplings, Licensed NdFeB magnets, Ferrite (Ceramic) magnets, SmCo magnets, Alnico magnets, bonded magnets, Yih Shan precision parts, etc.
		Circle Net supplies a variety of sintered neodymium magnets with energy products from 30 to 49 MGOe, intrinsic coercive force from 12K to 27K Oersteds, maximum working temperature from 80 to 190 ºC (176 to 375 ºF).
		If you have any questions which are not addressed here, feel free to send us an email.
	circle-net.com (159 words)

	100103What's New at Circle Net International LLC
		The mechanical softness in CuNiFe permits easy cold reduction and working, thus leading to many applications in the form of wire and tape.
		Other CuNiFe magnets are available per customer's individual requirements.
		Feller's magnetic couplings work in the sealless magnetic drive pumps, transporting volatile, flammable, explosive and toxic solution without leakage.
	www.circle-net.com /news.html (516 words)

	100103What's New at Circle Net International LLC
		The mechanical softness in CuNiFe permits easy cold reduction and working, thus leading to many applications in the form of wire and tape.
		Other CuNiFe magnets are available per customer's individual requirements.
		Feller's magnetic couplings work in the sealless magnetic drive pumps, transporting volatile, flammable, explosive and toxic solution without leakage.
	circle-net.com /news.html (516 words)

	Choosing PM
		Economic and technical advantages have also been found in the production of components for magnetic applications.
		Small permanent magnets of the Alnico, Cunife or Cunico types can be pressed and sintered to final shape and size, showing equivalent magnetic properties but finer grain structures and better mechanical strengths than similar cast materials.
		Soft magnetic sintered products in iron, silicon-iron and iron with about 5% of phosphorus are widely used in the manufacture of pole pieces and armatures for dc application.
	www.epma.com /about_pm/web_pages/nma_magnetic_materials.htm (326 words)

	Kontakt - HighTechAlloys Wuppertal, Werkstoffe für HighTech-AnwendungenAlloy C-22 C-276 Clal CuNiFe Eisen-Nickel ...
		Kontakt - HighTechAlloys Wuppertal, Werkstoffe für HighTech-AnwendungenAlloy C-22 C-276 Clal CuNiFe Eisen-Nickel Eisennickel Elgiloy Hastelloy Incoloy Inconel X-750 X750
		Alloy C-22 C-276 Clal CuNiFe Eisen-Nickel Eisennickel Elgiloy Hastelloy Incoloy Inconel X-750 X750
		Kupfer-Nickel Kupfernickel Litze Litzen MP35N Monel 400 Nickelband Nickelbasislegierung Nickeldraht Nickellegierung Nimonic Phynox Präzisband Sonderwerkstoffe X-750 Alloy 625 LCF Alloy 625LCF AMS 5599 AMS5599 AMS 5879 AMS5879 AMS 5596 AMS5596
	www.hightechalloys.de /kontakt (62 words)

Try your search on: Qwika (all wikis)