Factbites
 Where results make sense
About us   |   Why use us?   |   Reviews   |   PR   |   Contact us  

Topic: Engine tuning


In the News (Sun 12 Oct 08)

  
  Nitro Engine Tuning
The engine will be a little softer when accelerating from a standstill, but it’s the only way to ensure there is an adequate supply of fuel and oil when running at the upper end of the rpm range.
If the engine is able to idle steadily for a longer time, then it may start to lean out and heat up during a race and make it difficult to drive the car and keep the engine running.
Engine tuning is not a fl art; it just takes time to learn the particulars so you can maximize your power plant's performance.
www.rchobbies.org /cars_eng-tuning.htm   (3813 words)

  
  Engine tuning - Wikipedia, the free encyclopedia
Engine tuning or engine building is the adjustment, modification or design of internal combustion engines to yield more performance, either in terms of power output or economy.
Performance tuning focusses on the tuning of an engine for motor sport, although many cars built by hobbyists never compete but are rather built for display at motor shows or the simple pleasure of owning and driving such a car.
Increasing the size of the valves in the engine, thus decreasing the restriction in the path of the fuel/air mixture entering, and the exhaust gases leaving the cylinder.
en.wikipedia.org /wiki/Engine_tuning   (1206 words)

  
 Mandar's SQL server blog : Database engine Tuning Advisor (DTA)
Tune across multiple databases: You can tune a workload that involves multiple databases.
Tuning log: Database Engine Tuning Advisor writes to the tuning log all events that it cannot tune and provides a message that gives a reason why the event could not be tuned.
Then you can use Database Engine Tuning Advisor to evaluate the effects of these physical design structures without incurring the overhead of implementing the configuration before you begin tuning.
blogs.msdn.com /mandar/comments/647072.aspx   (562 words)

  
 Engine Tuning
We have left the title as Engine Modification, hoping reader's are attracted by the title.
The most important ingredient for power is good gas and the second most important ingredient is an ECU tuned to run the turbine's hot gas generator (your engine!) on this gas.
This was explained by just how different the Japanese high power STI engine versions are and why they are different from the current US WRX engine in the Engine Commentary section.
www.spdusa.com /engine_tuning.htm   (562 words)

  
 OFNA Racing - R/C Engine Tuning Guide
You tune the engine by measuring the engine’s temperature, and making the required adjustments to make the temperature correct.
If the idle speed is too low, the engine may stall on the starting line, or at the end of the straightaway when you let off the throttle.
Over 99% of all engine complaints are usually related to the tuning of the engine or clutch.
www.ofna.com /guide-tune.html   (713 words)

  
 Hydra Nemesis 2 Plug and Play Tuning Instructions
While engines in general differ in what high load AFR they require and make best torque at, the 3S generally will produce more torque under high load when the AFR is at least 11.5:1 or leaner but it does not tend to produce very much more torque when you go much leaner than 11.5:1.
When it does so, let the engine steady itself again and move the center cell that you are adjusting to track it and continue the richening or leaning process until you reach your desired target with the engine idling at a steady point.
The faster the engine is turning, the sooner the ignition process must start in order for peak cylinder pressures to happen at about 12-15 degrees after top dead center, which is when the piston is in the ideal location to translate pressure into torque.
www.mrcontrols.com /installs/nemesis/tuning.htm   (12363 words)

  
 Engine Fine Tuning - Tips & Techniques — Tuning Guide - Hot Rod Magazine   (Site not responding. Last check: )
On small-block Chevy engines, or any engine that has the two center exhaust ports siamesed on the cylinder head, pumping coolant directly from the radiator to the area between the two exhaust ports will help minimize detonation.
On nitrous engines especially, grinding the sharp edges on the piston tops to smooth radii is critical to keeping an engine in one piece.
Even on non-nitrous engines, the tops of the pistons should be smoothed to avoid any problems from heat building up in the piston, causing it to fail.
www.hotrod.com /techarticles/engine_fine_tuning_tips_techniques   (690 words)

  
 Daytona Sensors LLC - Tech FAQ Engine Tuning
Whereas excessively high compression ratio is the most common engine building mistake, the most common engine builder misconception is that increasing the compression ratio has a significant effect on power (or torque).
Engines with race camshafts exhibit large cyclical variations at idle - necessitating a relatively rich idle to prevent stalling.
From a practical standpoint, engine power output is most readily increased by increasing the displacement volume and volumetric efficiency.
www.daytona-sensors.com /tech_tuning.html   (1530 words)

  
 Engine tuning & diagnostic services in Abbey North - UpMyStreet
FindMyNearest… is the fast and easy way to find the nearest Engine tuning and diagnostic services in Abbey North, or any location in England, Scotland and Wales.
Tune At Home can give you what you want
Tune At Home based in Rochester can help you out with car engine tuning.
www.upmystreet.com /UK/findmynearest/results/motors/garage-services-and-mechanics/engine-tuning-and-diagnostic-services/results/in/kingston-upon-thames/Leatherhead.html   (378 words)

  
 Race Engine Jetting - Tuning a Race Engine :: Engine Tuning Resources & Tips.
It’s more of a challenge to tune a carburetor to achieve a lean 14.7:1 air/fuel at part-throttle and still deliver excellent and immediate WOT power, but it can be done.
The first thing we did was to adjust WOT tuning by swapping the stock CH secondary rods to thinner rods (eventually a pair of aluminum rods) until we had a WOT air/fuel that came in around 12.8:1.
The engine responded with a slightly richer mixture in light acceleration of around 13.2:1, but we still had a slightly rich cruise air/fuel ratio.
www.innovatemotorsports.com /resources/carb-tuning-hero.php   (1901 words)

  
 Top 15 Engine Tuning Tips - Tips & Tricks - Circle Track Magazine
However, when it comes to tuning the engine at the beginning of the season, or freshening it up midseason, Circle Track is here to help.
Cox is owner and operator of Cox Race Engines out of Ramseur, North Carolina, and has 25 years of experience building engines for short track cars, as well as drag and street performance.
Performance tuning and creating a baseline should be done during the off season or a practice session.
www.circletrack.com /tipstricks/33878_top_15_engine_tuning_tips   (2144 words)

  
 Engine Tuning
I tune this engine according to the instructions provided by OS for the 60B carb as well as looking at heli for visible vibrations and the quantity of smoke.
Now, we should notice the engine should be four-stroking less (it will still be four-stroking to some extent), we should also notice that the vibrations in the heli (canopy, fins, etc) will have lessened, but probably not vanished.
Tuning this thing was a whole different mindset and if the truth were to be told, I don't think I've got it at it's full potential yet so I'll not comment any further on it.
www.littlerotors.com /articles/enginetuning-140103/index.asp   (1704 words)

  
 Engine Performance Tuning Tips
If your engine is built, they will not necessarily give you more power but will allow your engine to reach it’s potential by eliminating the intake restriction of the stock air box.
If your engine is really built with cams, headwork, compression, etc. and you are interested in getting every bit of power, you might consider it, but it would be a finishing touch type of modification.
The engine felt more eager to rev and there was less drag when the AC compressor kicked on.
www.se-r.net /car_info/engine_performance_tuning.html   (16149 words)

  
 RE: GMS Engine Tuning Problem
Changed to a new Fox Miracle plug, reset mixture, another engine failure at 50' altitude on T/O. Changed to an old used Fox idlebar long plug, reset mixture, took off and the engine ran beautifully, equally well as with the OS F plug.
I noticed that when removing the igniter current that there was a greater than normal rpm drop but the engine tuned up ok. I did many circuits and aerobatics during 4 flights and suffered no engine cuts.
The engine top end power was down a few hundred rpm but all the other sins were forgiven due to the increased muffler pressure to the tank.
www.rcuniverse.com /forum/fb.asp?m=2650133   (3020 words)

  
 Engine Tuning Calculator - relative humidity
There is also a special version of the Engine Tuner's Calculator for users of digital weather stations that uses the values of temperature, absolute pressure and relative humidity.
This is a key parameter for engine tuning.
The relative air density is the ratio of the calculated air density to the air density at sea level using the ICAO standard reference conditions.
wahiduddin.net /calc/calc_hp.htm   (630 words)

  
 Chip tuning - Wikipedia, the free encyclopedia
Chip tuning refers to changing or modifying an EPROM chip in a car's or other vehicle's electronic control unit (ECU) to achieve better performance, whether it be more power, cleaner emissions, better fuel economy, or better appearance.
The ECU in a modern automobile, together with advanced engine technology, makes it possible to control many aspects of the engine's operation, such as spark timing and fuel injection.
A common approach to ECU tuning used by tuners and gearheads who like to modify their cars involves adjusting the air-fuel mixture and spark timing maps for greater power, or to smooth out drops in power.
en.wikipedia.org /wiki/Chip_tuning   (358 words)

  
 Bike engined cars, bike engine tuning, motorcycle engine tuning, engine tuning, big bore kits, piston kits
We also provide engine work and services to all bike-engineered forms of car racing motor sport.
Holeshot Racing's extensive knowledge of performance enhancing road and race bikes, acquired in 25 years of competition in all fields of motorcycle sport, ensures that you are getting the best service and experience in your quest for performance.
Bike engined cars, bike engine tuning, motorcycle engine tuning, engine tuning, big bore kits, piston kits, turbocharging, motorcycle turbocharging, motorcycle performance, motorcycle racing, land speed record, turbo bikes, gasflowing, rolling road, dynotesting, dynojetting, dyno tuning, powercommander, hayabusa tuning, hayabusa, Suzuki hayabusa, KandN, Akrapovic, motorbike parts.
www.holeshot.co.uk   (159 words)

  
 Engine Tuning How-to
Engine idles fine, but as you accelerate to almost hover speed, the engine dies immediately like someone hit a kill switch.
Engine idles good and is good in a hover, but at about 1/3 throttle the engine loads up and almost dies.
Loosen the nut on the engine that is just under the carb.This nut moves a shaft with a curve cut into it.
www.raptortechnique.com /enginetuning.htm   (2616 words)

  
 Dyno-less engine tuning.   (Site not responding. Last check: )
If you can’t get your bike-engined buggy tuned on a four-wheel dyno, and you’re not sure whether or not your engine’s running lean or rich or if it's a bit down on power, there is a little gizmo that can point the way.
Re-jet and tune the carburettors for absolute power on track, then use the AFR gauge to evaluate the mixture as a target for re-tuning at different altitudes or weather conditions.
When you’re done tuning, remove the sensor from its bung, and replace it with the plug.
www.rorty-design.com /content/dyno-less_tuning.htm   (1822 words)

  
 RC Engine Tuning Tips   (Site not responding. Last check: )
The first and foremost consideration when attempting to tune your glow engine is understanding the basic parts and their functions.
The natural operation of the engines causes of flow of gases to pass through the engine (through the carburetor) and out the exhaust manifold and on to the pipe or muffler.
Although it may be tempting to run your engine as lean as possible (does give a short-lived performance boost), this should only be done if you are very wealthy and like swapping engines out every race.
www.nitromonkey.com /tuning.shtml   (1644 words)

  
 Engine Tuning: Install a Cam Droppin' ZEX-tasy - Import Tuner
Overshadowed by the mighty DOHC engine, the single-over-head model has always been thought of as an inferior powerplant.
When removing the assembly be sure not to pull the bolts out of the unit for the fact that they line up the rocher shafts with the cam journals.
To ensure that there is no oil leak place a light film of silicone on the outside surface of the cam seal.
www.importtuner.com /tech/0102it_engine_tuning_cam   (718 words)

  
 BMW e39 engine tuning
Heat shield is manufactured from low thermal conductivity composite to keep the hot air of the engine out of the intake air.
Carbon fiber engine cover, BMW 6 cylinder models with 2.5 liter or 3.0 liter M54 motor E46 325 and 3
Heat shield is manufactured from real carbon fiber composite to keep the hot air of the engine out of the intake air.
www.electrodyne.cc /search_engine_info/e39tun.html   (1295 words)

  
 Engine Tuning: The Power of Crower - Import Tuner
With more than 45 years of cam grinding experience, Crower is a name to be known in the tuner aftermarket.
Recently, Crower released its new line of cam cores for the Honda/Acura B18C VTEC engine.
These are not regrinds of stock cores, but Crower-manufactured cores that exceed factory specs for hardness and compatibility.
www.importtuner.com /tech/0105it_engine_tuning_crower/index.html   (719 words)

  
 Riechert Tuning Air Cooled Volkswagen Engines
Riechert Tuning is specialized in air cooled engine parts for automotive and industrial Volkswagen engines.
Riechert Tuning is the only Volkswagen tuner with a big stock of new Type IV crank cases and the impossible to find new Type IV cylinder heads!
Riechert Tuning is YOUR source for brand new Type IV cylinder heads and crank cases, or any other parts, modified or how they are.
www.ismi.net /riecherttuning   (149 words)

  
 Amazon.com: Modern Engine Tuning: Books: A. Graham Bell   (Site not responding. Last check: )
Forced Induction Performance Tuning A Practical Guide to Supercharging and Turbocharging by A.
Certainly covered all the basics of combustion engines and introduced some key formulas to remember.
This book is essential to anyone wanting to tune a newer engine with electronics.
www.amazon.com /Modern-Engine-Tuning-Graham-Bell/dp/0854299785   (1003 words)

  
 Error message when you use Database Engine Tuning Advisor in SQL Server 2005: "Attempt to initialize the CRT more ...
When you use Database Engine Tuning Advisor to analyze the performance effects of workloads in Microsoft SQL Server 2005, you may receive the following error message:
Additionally, Database Engine Tuning Advisor stops responding after you receive this error message.
If Database Engine Tuning Advisor inherits the application compatibility settings from the Explorer.exe process, the Microsoft Windows loader tries to initialize the C run-time library (CRT) Msvcp80.dll file two times when you start Database Engine Tuning Advisor.
support.microsoft.com /?kbid=913395   (436 words)

  
 Chip Tuning VW, BMW, Audi and Alfa Romeo - Angel Tuning
Chip Tuning VW, BMW, Audi and Alfa Romeo - Angel Tuning
MOBILE TUNING ACROSS THE UK plus centres in
MOBILE TUNING ACROSS IRELAND (N & S) also
www.angeltuning.co.uk   (55 words)

  
 Engine Management & Tuning - NASIOC
All tuning and general questions about the AccessPort system.
All tuning and general questions about the UTEC system.
All tuning and general questions about all the stock ECU reflash systems.
forums.nasioc.com /forums/forumdisplay.php?f=80   (182 words)

Try your search on: Qwika (all wikis)

Factbites
  About us   |   Why use us?   |   Reviews   |   Press   |   Contact us  
Copyright © 2005-2007 www.factbites.com Usage implies agreement with terms.