
	Where results make sense

Topic: Float valve

Related Topics

Compact star

Mergers and acquisitions

Religious segregation

Moka District

	Float Valves by Cleveland Valve Co
		This valve eliminates all of the problems caused by mechanical float valves as well as outperforms any other valve on the market with respect to valve life, inlet pressure and water flow.
		Conventional valves measure 20" to 36" from valve to float.
		Conventional Valves are made from precision machined brass parts and use water levels to create leverage on the stem which forces the Plunger inward to close the valve.
	www.clevelandvalveco.com /tech/technology.html (818 words)

	Patent 5445501
		Further, the change-over valve 120 is of such a construction that when one of the valve parts of the gas inlet and outlet valve mechanism is closed, the other valve part is opened, and as understood from the relationship in the position of both valve parts 122, 123 and the actuating rod 121 in FIG.
		An outlet valve 20 is housed in the operating fluid outlet 11 and an inlet valve 21 is housed in the operating fluid inlet 13, said inlet and outlet valves constituting a change-over valve 120 similar to the valve shown in FIG.
		Moreover, when the inlet valve 21 is opened and the outlet valve 20 is closed, a force is applied to the pin 76 so as to rotate the axis of the pin 76 because the center axis of the outlet valve 20 and that of the slider 53 are shifted relative to each other.
	www.freepatentsonline.com /5445501.html (3557 words)

	The Valve Shop - Shop Valves Online! Float Valves, Float Rods, and Floats
		The valve is operated mechanically by a float which rests on the top of the liquid.
		The amount of liquid pressure the valve can shutoff against is determined by the length of the rod and size of the float for a given valve size.
		The patented PVC float valves are heavily constructed, use stainless steel hardware, santoprene seals and have proven reliable after many years of service.
	www.thevalveshop.com /menu/manual/kerick/mfloat.html (150 words)

	Patent 4606373
		Another example has the connecting end of the float rod threadably engaged with a valve lever, such that adjustment of the position of the float is effected by rotatably lengthening or shortening its extension from the valve, thereby effecting the closing of the valve and thus the level of fluid in the container.
		The level of the water (14) is controlled by a conventional float valve mechanism indicated generally by the numeral (16) mounted within the tank (13) below the lid (17) of the water (11), which closes with a seal (18) between the mating surfaces of the base (12) and lid (17).
		Thus, by changing the position of the float (23) and stem (24) relative to the valve (21) and lever (22), via unfastening and fastening the wing nut (26), the amount and level of water (14) within the tank (13) may be changed.
	www.freepatentsonline.com /4606373.html (1626 words)

	Baker Oil Tools Drill Pipe Float Valves (Site not responding. Last check: 2007-10-20)
		The valve opens when the first joint is raised out of the hole assuring the first joints drain and are not pulled wet.
		This valve is used when monitoring the bit head for gas pressure and/or gas pockets, allowing measurement of differential pressure when required.
		The fast acting flapper valve opens when the kelly is pulled out of the hole, reducing the possibility of pulling a wet string along with the associated safety hazards.
	www.bakerhughes.com /bot/specialty_products/drilling/dpv.htm (871 words)

	Float & Lever Valves (Site not responding. Last check: 2007-10-20)
		Float valves and lever valves are designed to control the level of liquids through mechanically actuation.
		Float valves are actuated through the attached float ball, float rod, and lever assembly and do not require any external power source.
		Lever valves are actuated through the use of some external power source such as manual operation, float boxes/mechanisms, electric motors or other actuators, through external linkage to the lever of the valve.
	www.keckley.com /float.htm (246 words)

	Product Category Results (Site not responding. Last check: 2007-10-20)
		Valve Positioners (86 companies) Valve positioners compare the control signal to the actuator's position and move the actuator accordingly.
		Valve Actuators, All Types (299 companies) Valve actuators are devices that, in response to a signal, automatically move the valve to the desired position using an outside power source.
		Gas Valves (117 companies) Gas valves are used to handle and control the flow of gaseous media such as liquefied petroleum and natural gas.
	globalspec.com /ProductFinder/FindProducts?query=pneumatic+float+valve (463 words)

	Float Valve and Float (Model-A.org)
		Float Valves must be very tight against their gasket or they leak, especially if casting threads are sloppy.
		The desired number to use under the float valve to obtain 9/16 to 5/8 inches of fuel in the main well varies with the valve design used.
		The effect of this dimple is a lateral bind on the valve needle that prevents it from closing completely and sealing.
	www.modela.org /float_valve_float.html (392 words)

	float valves by kerick float valve (Site not responding. Last check: 2007-10-20)
		The unique makeup of these PVC valves has resulted in a cost effective alternative to stainless steel float valves without the corrosion and lead hazard associated with brass float valves.
		Kerick Valve’s attention to details and quality has resulted in PVC float valves that have proven to be reliable after many years of service.
		float valves made by Kerick float valves of Jacksonville are the best float valve value around.
	www.valve-float.com (113 words)

	Float Valve ball
		The 4 x 5" float works well with the low flow valves that have a.30 orifice such as the PS75LS and PT75LS.
		Floats have 1/4-20 self-tapping thread connections for use with PS75SS and PT75SS valves, but can be enlarged to 5/16-18.
		Floats have 5/16 self-tapping thread connections to use with PS125SS and PS150SS float valves and are available with a 1/4" self-tapping thread connection to be used with PS100SS and PT100SS float valves.
	www.floatvalve.com /Floats.htm (122 words)

	Bi-Level, Float Control Valve
		The float pilot senses a low- and high-water level in the tank or reservoir and will alternately pressurize and vent the upper control chamber of the main valve.
		For high-level closing the adjustable float ball rises to the high-float stop and causes the float pilot to switch position.
		As tank level drops the main valve remains closed until the float ball drops to the low-float stop pilot and causes the float pilot to switch position.
	www.pelmareng.com /Bermad_750_Series.html (283 words)

	Float Valves from Kerick float valve, mini float valve, plastic float valves & PVC float valves
		Float valves of PVC by Kerick float valve are a high quality, heavy duty, corrosion resistant answer to automatic fluid level control.
		Our PVC float valve is the cost-effective alternative to stainless steel and the non-corrosive alternative to a brass float valve.
		Kerick Valve’s attention to details and quality has resulted in a PVC float valve that has proven to be reliable after many years of service.
	www.floatvalve.com (139 words)

	Homeglossary.com - The World's Most Complete Real Estate Directory (Site not responding. Last check: 2007-10-20)
		When the float that is rising with the water in the tank reaches a certain level, the valve shuts off the incoming water.
		Floating floor construction is used when there is a need to separate the rest of the building from noise, vibration or a combination of these elements often produced by machinery.
		Check valve that prevents a reverse flow of water when a hot water heating system is turned off.
	www.yourwebassistant.net /glossary/f9.htm (1066 words)

	The Valve Shop - Shop Valves Online! Float Valves, Float Rods, and Floats
		The patented PVC float valves are heavily constructed, utilize stainless steel hardware, santoprene seals and have proven reliable after many years of service.
		Kerick Heavy Duty PVC Float Valves are available with various size float rods and floats for low to high flow automatic level control applications.
		Kerick Mini Float Valves are ideal for low flow automatic level control applications where corrosion resistance and compact sizes are needed.
	www.thevalveshop.com /menu/manual/kerick/kerick.html (124 words)

	Upper Casting Fuel Line Passage is restricted to Float Valve via Strainer. (Model-A.org)
		Float is set too high or a Pin hole absorbs gasoline into float.
		Float Valve does not seat properly due to Dirt, Rust or Material Failure.
		Gas Adjusting Valve is open too much or Seat is not honed to let needle seal.
	www.modela.org /upper_fuel_line_restricted.html (282 words)

	Valve engineering - Float valve for flow control
		I need to design a float that is attached to an arm that will open or close a butterfly valve that controls the level in a retention tank.
		I've contacted the valve manufacturer and he said the shut-off torque for the valve is 850 in-lbs.
		I was figuring that the lever arm from the centerline of the valve shaft to the float would be about 36in.
	www.eng-tips.com /viewthread.cfm?qid=35476 (336 words)

	Windmill Well Accessories including float vlaves and rod guides
		The float arm is made of cast iron and is 19" long with a nole in the end for mounting a flat tank float.
		By removing the two screws and connecting the handle in position perpendicular to that shown, the valve can be used on the side of the watering trough, instead of the bottom.
		Rubber float measures 2-3/4" thick and 12" diameter, with a 3/8" hole in the center for mounting to the float valve.
	www.deanbennett.com /accessories1.htm (526 words)

	Keraflo,Float,water tank,stainless steel,cistern,keraflo,water treatment,Plumbing,manufacturer,control valve,flow, ...
		The level control valve is designed to replace conventional BS1212 and equilibrium valves, known as ballcocks or globe valves, used by the plumbing industry in water tanks or cisterns.
		The unique design and high quality of Keraflo Aylesbury™ valves, manufactured in either brass or stainless steel and incorporating ceramic discs and a puncture proof float, enables them to far outperform conventional ball float valves.
		The weighted key-shaped float can be accurately set in a number of positions on the float arm.
	www.keraflo.co.uk (283 words)

	Service Parts Kitchen
		Controlling the flow of water to and from the tank is accomplished by using a fill valve and a flush valve.
		If the flush valve seat is damaged or corroded, replace either the seat or the entire flush valve.
		Adjust fill valve float position until the waterline level matches the waterline indicator inside the toilet tank.
	www.serviceparts.kohler.com /SP_FAQestions.html (2488 words)

	The Reef Tank - Float Valve Set Up Problem (Site not responding. Last check: 2007-10-20)
		I have purchased a Kent float valve that I'd like to put in my sump and hook up to my RO/DI system.
		However, I have a gl* tank for a sump and suspect that it is tempered and thus can't be drilled to mount the float valve with the through fitting on the float valve**.
		My float valve is a different style than the kent but I glued a plexi bracket to the divider wall in my sump to attach it too, using super glue
	www.thereeftank.com /forums/showthread.php?t=516 (514 words)

	ADI's Pond and Water Garden Community - Float Valve idea
		The the water level float that came with the pond is a an aquascape.
		There is water fed from the well through a shut off valve to the the float.
		I placed that over the float valve housing and the problem was fixed.
	aquascapedesigns.com /messageboard/showthread.php?t=4839&goto=newpost (745 words)

	U.S. Pregrant 20040035466 - Float valve (Site not responding. Last check: 2007-10-20)
		For opening and closing the inlet port (26), there is a valve operating mechanism comprising a valve operator (60) having a valve member (67) and a lever (61) mounted for pivoting movement about generally central pivot point (65).
		Actuator means (40) is coupled to the float (31) and switches between a standby condition an active condition respectively to the closed and open positions of the valve operating mechanism (60).
		The actuator means (40) comprises an over-centre mechanism having an actuator (71) which is operatively associated with the valve operator (60), a float follower (41) movable in response to rising and falling of the float (31), and a spring mechanism (58) acting between force points on the float follower (41) and the actuator (71).
	cxp.paterra.com /uspregrant20040035466.html (196 words)

	FLOAT VALVE PLASTIC 3/4 MPT W/FLOAT, LOCKNUT & WASHER (DIAPHRAM TYPE) (Site not responding. Last check: 2007-10-20)
		The float valve assembly is designed so the action of the float riding on the top of the rising water level in the float tank will physically shut off a valve and cut the water supply to the tank.
		When the water level falls, the valve reopens and water is again allowed to flow into the tank.
		The float valve assembly is generally made up of a male inlet fitting, an outlet which may or may not be threaded, and a short controlling arm on a pivot which creates the motion of the arm.
	www.buykimco.com /floatvalplas.html (180 words)

	Kerick Valve float valves (Site not responding. Last check: 2007-10-20)
		Kerick Valve currently offers alternatives to Roberts bob float and Watt brass float valves with its patented plastic float valve.
		These PVC float valve is heavily constructed and utilize stainless hardware.
		Call them tank valves, ball float valve, fill valve, watt valve, robert valve, ball valve, stock tank valve, automatic float valve, livestock water valve or Kerick valves we offer what we think is the best float valve on the market.
	www.plasticfloatvalves.com (71 words)

	The Valve Shop - Shop Valves Online! Valve Manufacturers
		MCF Valves center sections are the heart of and first choice in selecting the type of valve to suit your application.
		MCF Valves delivers to you an assembled and tested valve that is leak free, easy to install, easy to use, easy to maintain and built to last.
		Cast carbon steel and low-alloys, forged valves, marine valves, cast iron and ductile iron valves are manufactured under the NEWCO logo.
	www.thevalveshop.com /menu/mfg.html (1525 words)

	Kerick Valve float valves jax. Fl. Jacksonville, Florida
		These valves are not to be confused with cheaper float valves that are made from plastic to cut cost.
		These valves are heavily constructed of PVC to be better then the brass valves they replace.
		Similar benefits of a stainless steel float valve at a faction of the cost.
	www.kerickvalve.com (84 words)

	Float Valves (Site not responding. Last check: 2007-10-20)
		Float valves of PVC by Kerick float valves are a high quality, heavy duty, corrosion resistant answer to automatic fluid level control.
		Our PVC float valves are the cost-effective alternative to stainless steel and the non-corrosive alternative to brass float valves.
		Kerick's PVC float valves resist corrosion, resulting in long and dependable service.
	www.float-valves.com (130 words)

	OCV \| Float Control Valve Series 8000
		For maximum efficiency, the OCV control valve should be mounted in a piping system so that the valve bonnet (cover) is in the top position.
		Other positions are acceptable but may not allow the valve to function to its fullest and safest potential.
		In particular, please consult the factory before installing 8" and larger valves, or any valves with a limit switch, in positions other than described.
	www.controlvalves.com /series/engineering/engineer_dimension.html (137 words)

	Aqua Art Koi, Fish, Garden Ponds...Float Valve
		This is the float valve that comes with our D190 automatic water level control device and is the only float valve that will fit in the D190.
		C276BV All Plastic Float Valve, Black Bladder: This newer, all plastic float valve is ideally suited for pond use.
		Its dark grey valve body and small float bladder along with a much improved stainless steel screw with easy adjust wing nut make it more desireable than C27603.
	www.aquaart.com /floatvalve.html (124 words)

	Float valve - Wikipedia, the free encyclopedia
		Over US$155,000 has been donated since the drive began on 19 August.
		A float valve is a mechanical feedback mechanism that regulates fluid level by using a float to drive an inlet valve such that a higher fluid level will force the valve closed whilst a lower fluid level will force the valve open.
		This page was last modified 08:54, 16 February 2005.
	en.wikipedia.org /wiki/Float_valve (89 words)

	CESCO BRASS, Ltd. - Makers of Burlington & Scovill toilet fill valves
		CESCO BRASS is a leading manufacturer and supplier of commercial quality toilet fill valves (brass ballcocks), flush valves, toilet tank flush levers and handles, other toilet tank trim, replacement parts, and accessories.
		Our toilet fill valves regulate and relieve excess water pressure and water hammer and remain whisper quiet.
		float for all ballcocks, Douglas-style brass flush valve anti-siphon ballcocks that substitute the duckbill washer, Professional quality (high copper content), full dimension, 1/4-20 roll-threaded brass float rods bend easily and stay in place.
	www.cescobrass.com (527 words)

Try your search on: Qwika (all wikis)