
	Where results make sense

Topic: Fluted feed

	Reichel & Drews Inc. - Tech Tips - UIP Quick Change Blender Operation (Site not responding. Last check: 2007-10-24)
		Both hoppers will continue to feed until Hopper ‘H’ runs dry, at which time it is stopped and may be cleaned and charged with the "mixture" for the next blend to be run (Blend III).
		This adjustment can be made by turning the vertically mounted lead screw with the hand knob on top, located on the operator side of the machine in a clockwise or counter-clockwise direction when viewing the hand knob from the top, to obtain the desired adjustment.
		The gate for controlling the amount of granules that are distributed across the face to the fluted roll onto the sheet can be adjusted so that it is parallel to the face of the fluted roll.
	www.therdigroup.com /rd/technology/tip-06.html (1263 words)

	Edgers / Ripsaws
		All five feed rollers are driven by means of a robust chain to ensure reliable and durable feed.
		The feed speed is infinitely variable between 2 - 75 m/min.
		Standard machines are fitted with fluted feed rollers but rubber covered rollers can be supplied if delicate material has to be sawn.
	www.paul-d.com /web/kme/kme4-gb.html (84 words)

	Soybean Seed Quality as Affected by Planter Meters (Site not responding. Last check: 2007-10-24)
		Five commercial planter meters were compared: A fluted roller meter, an air disk meter, a single-run feed cup meter, an air drum meter and a horizontal plate meter.
		The fluted feed rollers were open about 10 mm when the slow speed (14-tooth driven sprocket) drive was used, as recommended by the manufacturer for soybean metering (Fig.
		Since the fluted roller meter was set to space seeds farther apart for narrow (18-cm) rows than for wide (76-cm)rows the mean distance between seed spacing was also greater for narrow rows than for wide rows.
	www.ag.uiuc.edu /~stratsoy/ispob_db/lor_html/2.html (3579 words)

	Fluted
		1) " Fluted" -- In the context of Fluted
		It usually has a base and the shaft is often fluted (it has grooves carved up its length).
		It is distinguished by slender, fluted pillar s with a large base and two opposed ''v 53: e of the Greek orders, characterized by a slender fluted column having an ornate capital decorated with ac 67: Romans.
	www.lottery-news.net /dust24449-fluted.html (336 words)

	Adjusting a Grain Drill for Planting Soybeans, AGF-114-01
		In order to obtain an ideal plant stand for optimum yields, the seed must be uniformly spaced within the row and planted at a uniform depth of 3/4 inches to 1-1/4 inches.
		Fluted feed-metering mechanisms on grain drills generally do not space soybean seed uniformly in the row and may split or damage large seed.
		Fluted seeding mechanisms usually have two adjustments to accomplish the desired seeding rate and to accommodate different size crop seeds.
	ohioline.osu.edu /agf-fact/0114.html (636 words)

	The Verminator by ALL AMERICAN AG
		Fluted and spring loaded coulter easily and cleanly cuts through trash and stubble.
		The pocket gopher is an underground dweller, only occasionally coming above ground at night to feed or migrate.
		It has a brownish fur coat that never gets dirty and fur lined external cheek pouches in which food is carried.
	www.allamag.com /theverminator (579 words)

	Travis Lumber--Best Payback (Site not responding. Last check: 2007-10-24)
		Fluted feed rolls keep the cant positioned against the linebar for precise feeding of the curved cant through the saws.
		According to the manufacturer, the curve sawing theory at the gang is very similar to the manner in which a planer works.
		A Caterpillar 966 feeds logs to the merchandising line, which begins with an ASM self-centering infeed and 30 in.
	www.inovec.com /success/travis2.htm (1019 words)

	[Jewelry making - Article 01358] - Re: [Orchid] CNC Cutting
		Therefore, you will feed a 4 fluted tool, 4 times faster than a single lip or single flute cutter, and 25% faster than a 3 fluted tool.
		You cannot run the spindle wide open and enter whatever you feel like in relation to the feed rates, because at the end of the day, the chip load means you can only remove so much material at a given RPM and calculated feed rate.
		Conclusion is to remove as much of the material as possible with fluted tools before you move to your pyramid tool to engrave the detail, because the engraving of detail is their designed function and they are not to be considered as a high rate of material removal tool.
	www.ganoksin.com /orchid/archive/200311/msg01358.htm (921 words)

	Solid carbide drill geometries double feed rates: News from Kennametal UK
		Three solid-carbide drill series, which are optimally designed for machining steel, SS and CI, can reach twice the feed speeds of straight-fluted drills without any problem.
		Large flutes guarantee excellent chip flow even at extreme speed.
		This enables process-reliable drilling of case hardening and heat treatable steels at up to 200m/min at high feed rates, without any reduction in tool life compared with conventional drills and cutting speeds.
	www.manufacturingtalk.com /news/ken/ken122.html (398 words)

	Two-fluted gun drill offered as standard item: News from Guhring oHG
		However, thanks to chip breakers and formers as standard, the gun drills are also suitable for the machining of long-chipping aluminium alloys.
		The main advantage of two-fluted gun drills is the sub-stantially higher feed rate that can be applied during the production of the hole.
		This is due to the design of the two-fluted gun drill, it has two cutting edges and two flutes.
	www.manufacturingtalk.com /news/guh/guh105.html (371 words)

	Antares Industrial and Collet Tools
		These tools are available with one, two, or three flutes depending on the material being cut and the size of the tool.
		Slower feed rates and plunge rates must be used to avo
		Slower feed rates and plunge rates must be used to avoid breakage and prolong tool life.
	www.antaresinc.net /2004ColFluted.html (545 words)

	Truax Seed Planting Equipment
		The small seed box, with row dividers and fluted feed, uses a standard shifter output control.
		The fluffy box, with row dividers, agitator, and picker wheels has a derailleur for output control.
		The cool season box also has an agitator and has standard grain Drill cups with fluted feed and a shifter output control.
	www.truaxcomp.com /rangeland.html (392 words)

	Seeding Tools
		Meters are driven by the right rear wheel.
		Fluted feed cups accurately meter seed from seedbox to furrow openers.
		Traction feed wheel has an aggressive tread that pulls fertiliser to the openings.
	www.deere.com /en_AU/equipment/ag/seeding/pf_1590_full.html (551 words)

	Brillion Iron Works, Inc. Press Release
		Brillion’s larger Turfmaker II Micro-Meter feed cups boast precision fluted feed rolls to meter tall fescue seeds at rates from 24 to 462 pounds per acre and when the standard speed-up kit is installed, up to 924 pounds per acre.
		Bluegrass rates are 24 to 389 pounds per acre, and up to 778 pounds per acre with the speed-up kit.
		An optional Small Seed Box with smaller Turfmaker Micro-Meter feed cups permits overseeding of smaller seeds such as bent, rye, and centipede at lower rates either together with, or independently from, the standard large seedbox.
	www.brillionfarmeq.com /releases/release4_25B.html (515 words)

	Using Common Drills... What Drills?
		The very best drills for this technique are those with a fluted seed dispersal mechanism in the drill box (figure 6).
		Here is some food for thought: In the Southern Plains and south central United States, good used grain drills with fluted seed-feeding mechanisms can be purchased at farm sales or from dealers for $100 to $1,000.
		The equipment can be converted to make a special planter capable of rowed or broadcast plantings.
	www.noble.org /Ag/Forage/UsingCommonDrills/6.htm (181 words)

	Sowing
		The drill also places the seed at a measured distance below the soil, so that less seed is required.
		The standard design uses a fluted feed metering system, which is volumetric in nature; individual seeds are not counted.
		Rows are typically about 10-30 cm apart, depending on the crop species and growing conditions.
	www.brainyencyclopedia.com /encyclopedia/s/so/sowing.html (408 words)

	Heckler and Koch Firearms (Site not responding. Last check: 2007-10-24)
		Note the barrel removal handle and the carrying handle.
		Feed: 15 or 30 round curved box-type magazine
		Seen in the picture is the 15 round magazine.
	people.zeelandnet.nl /jhwilde/heckler_and_koch_firearms.htm (620 words)

	HAND - Online Information article about HAND
		magazine feeds for castings and forgings that cannot pass through a hollow spindle have contributed greatly.
		With curves, or angles and curves in combination, taps, reamers and drills can be fluted or grooved, the teeth of wheels shaped, and in fact any outlines imparted (fig.
		Here the work of the fitter, as well as that of the planing and allied machines, is invaded, for much of this work if prepared on these machines would have to be finished laboriously by the See also:
	encyclopedia.jrank.org /GUI_HAN/HAND.html (7869 words)

	Brillion Iron Works, Inc. Press Release
		Sure-Stand II features include 8-, 10-, or 12-foot seeding widths with 15-, 19-, or 23-bushel hoppers respectively, combined with industry-best Brillion Micro-Meter fluted feed cups.
		The 8-, 10-, or 12-foot seeding widths with 15-, 19-, or 23-bushel hoppers respectively are combined with legendary Brillion seed metering accuracy.
		Brillion Micro-Meter feed cups precisely meter alfalfa seed at rates from 4 pounds per acre to 47 pounds per acre and will double those rates when the standard speed-up kit is installed.
	www.brillionfarmeq.com /releases/release4_25A.html (416 words)

	Vitaille Recipe Recources and Food Related Information
		In the modern world barley is used mostly for animal feed and for malt for brewing and distilling; only a small proportion is used for soup, cereal, and bread.
		Barolo An Italian red wine from the Piedmont, south of Turin, made from the Nebbiolo grape; deep, full-bodied, and slow-maturing, it is an exceptional wine.
		butter and eggs, often baked in a characteristic fluted mold with a
	www.vitaille.com /reference/encyclopedia.php (17483 words)

	FN A5 M Shooting System (Site not responding. Last check: 2007-10-24)
		The FN A5 M Shooting System represents a turnkey precision rifle system that comes ready to unpack, verify zero and deploy.
		Built on the Pre-’64 style action, the A5 M features Controlled Round Feed, a massive external claw extractor and proven three-position safety.
		The heavy barrel is free floating with the action set in a McMillan A5 fiberglass tactical stock that offers adjustments for both cheekpiece and length of pull.
	www.fnhusa.com /contents/r_spr_a5mss.htm (244 words)

	Telar - Dryers for the Plastics Industry
		Combination units eliminate press mount hoppers for ultimate flexibility and safe, easy material changes.
		Portable dryer only units available in 2 and 4 bed designs and the latest in fluted bed technology.
		Small direct to feed throat dryer/hopper combination units.
	www.telarcorp.com /dryers.htm (67 words)

	Tivoli
		The biting, disease-ridden insects that feed on the populus Romanum below do not dare to rise to the gray hills above.
		The peristyle of eighteen fluted Corinthian columns was of travertine material found in abundance in Tivoli.
		The design and workmanship are superior and show a knowledge of ancient Greek round temples such as the tholoi at Epidauros and at Delphi.
	www.artsonthehill.com /Tivoli.html (617 words)

	Truax Seed Planting Equipment
		The Jumbo Grain box has a capacity of two bushels per foot of box length and has the same cool season/grain agitator and fluted feed cups as the FLEXII Series Grass Drill.
		The small seed box features row dividers and fluted feed cups.
		Seed delivery and placement in the soil is completed through the double disc furrow openers with depth bands and the independent press wheel.
	www.truaxcomp.com /graindrill.html (165 words)

	Planting Revolution 6 - Kinze Manufacturing (Site not responding. Last check: 2007-10-24)
		Before KINZE’s® Brush-Type Seed Meter, the only mechanical means of metering some crops was thru the use of a planter feed cup...
		or the fluted feed on a grain drill.
		Soybeans, basically considered a fodder crop, were used for cattle feed because of the labor involved in harvesting the crop.
	www.kinzemfg.com /company/plantrev/p6.html (312 words)

	Coconut/Non Pareil Sprinkler - ProcessPlant.com (Site not responding. Last check: 2007-10-24)
		This unit comes from the bakery industry where it was sprinkling toppings onto baked goods.
		Toppings such as coconut or non pareils are fed in via the hopper where fluted feed rolls distribute product evenly onto the product.
		This feeds into a turret vibroveyor which decants the recycled topping back into the dispersion hopper.
	www.processplant.com /view_item.asp?ID=7866 (154 words)

	S.I. Distributing Inc. (Site not responding. Last check: 2007-10-24)
		"The old grain drills used a cast iron fluted feed system," Hawkins said.
		The fluted feed unit, on the other hand, moves from left to right and you have to increase or decrease the size of the pocket that the seeds drop into."
		Regardless of whether farmers use fluted feed or belt metering systems, they should perform routine maintenance on their drills and make sure the implements are set up for maximum efficiency.
	www.sidist.com /purduenews.shtml (685 words)

	Performance Charades
		Things I needed to modify were the manifold, exhaust, oil feed and oil return.
		The new turbo had a fluted pipe feed and luckily enough the standard pipe was perfect diameter so we cut off the end piece of the feed and fluted it.
		Then just cut a section out of the pipe towards the turbo end and rejoined with hose so that the pipe didn't bend and kink.
	users.tpg.com.au /charadet/turbocharade/turbodetails.htm (668 words)

	Machine Feature (Site not responding. Last check: 2007-10-24)
		This box can be used to drop slug pellets into the row for efficient slug control.
		The small seeds meter is a smaller version of our well known fluted feed cup.
		The cup accurately meters seeds such as clover, alfalfa and other small seeds.
	www.landpride.com /gpi/drills/features/smallseeds.html (102 words)

	Marco Technology Corporation
		Because we feel strongly about the ability to control product flow and screen residence time, adjustable screen shake is a standard feature on every machine.
		Proven, Over-the-Roll feed hopper prevents mechanical damage by eliminating pinch points.
		The exclusive, staggered feedroll provides a uniform flow rate into the air system without pulsating, even in the toughest applications.
	www.marcotec.com /grain_cleaning.htm (978 words)

	A TD-700 Laboratory Fluorometer Suggested Method for Aflatoxin Analysis
		It provides a fast, simple, and accurate procedure for determining low levels of aflatoxin in corn, milo, rice, peanuts, peanut butter, tree nuts, cottonseed, feed and grain samples.
		6.1.2 Gravity filtration setup: Fold edges of fluted filter paper over a filtration cup.
		6.1.8 Pour extract into fluted filter paper assembly.
	www.thelabrat.com /protocols/aflatoxin.shtml (1017 words)

Try your search on: Qwika (all wikis)