Latch (hardware) - Factbites
 Factbites
 Where results make sense
About us   |   Why use us?   |   Reviews   |   PR   |   Contact us  

Topic: Latch (hardware)


    Note: these results are not from the primary (high quality) database.


  
 Child Passenger Safety Technical Encyclopedia
Hardware at the end of a LATCH attachment, such as a top tether hook specified in FMVSS 213 or other latching device compatible with lower anchorages specified in FMVSS 225, that enables the CR to be securely fastened to a LATCH anchorage.
— One of two hardware assemblies on a CR with LATCH, possibly including webbing (or a single assembly with a connector at each end) that enables the CR to be securely fastened to one of two (or both) lower anchorages.
A standardized system of user-ready hardware in vehicles, consisting of two lower anchorages and one upper anchorage specified in FMVSS 225, for installing child restraint systems independent of the vehicle seat belt; popularly referred to as LATCH in the U.S. and similar to the Canadian Lower Universal Anchorage System (LUAS).
www.carseat.org /Technical/tech_update.htm   (13468 words)

  
 LATCH: lower anchors and tethers for children Partners for Child Passenger Safety - Children's Hospital of Philadelphia
All new vehicles as well as infant, convertible and forward-facing child safety seats made after September 1, 2002, are equipped with LATCH. The LATCH system consists of built-in straps and hooks on the safety seat and anchor hardware in the vehicle:
LATCH stands for Lower Anchors and Tethers for Children. Since it is estimated that 4 out of 5 car seats are not installed correctly, the LATCH system was developed to make it easier to correctly install child safety seats without seatbelts.
A: LATCH anchors are required in at least 2 seating positions in the rear seat of your car.
www.chop.edu /consumer/jsp/division/generic.jsp?id=77978   (1171 words)

  
 » Hewlett-Packard has technology to replace transistors :: TechWhack News :: Tech Stuff and Business News
Who in the dickens will remember something called the “crossbar latch?” It sounds very old-fashioned, and many will likely assume it is nothing more than a carpenter’s tool, or some common hardware store part for their picket fence.
And their developed crossbar latch provides a key element needed for building a computer using nanometer-sized devices that are relatively inexpensive and easy to build.
The company announced on Tuesday that they have proved it that their new development ‘crossbar latch’ can provide the signal restoration and inversion required in computers without any needs of transistors.
news.techwhack.com /708/hp-crossbar-latch   (1035 words)

  
 Elderly Instruments Vintage & Used Instruments - Solid Body Electric Guitars
EC+, fireburst finished maple top, black finished mahogany body and neck, 22 frets, rosewood fretboard, trapezoid inlays, two humbucking pickups, gold hardware, tune-o-matic bridge, stop bar tailpiece, 1-11/16" nut, 24-3/4" scale, with OHSC (1 funky latch) (SN:01693473)
VGC, body stripped to natural sealer, bolt-on maple neck, 21-fret rosewood fingerboard, dot inlays, 1-1/2" nut width, 22-1/2" scale, one single coil pickup (body routed for two), pots date to 1963, tortoise-w-b pickguard, original hardware, on consignment, with grey OHSC (orange lining) (SN:L19341)
EC+, Cobalt Blue finish, alder body, bolt-on maple neck, 24-fret rosewood fingerboard, pearl dot inlays, 1-5/8" nut width, 25-1/2" scale, one Seymour Duncan humbucking pickup, coil split switch, black hardware, traditional vibrato bridge, made in Japan, with Gator HSC (SN:03010057)
www.elderly.com /30U.htm   (1035 words)

  
 Steel Door Knockers,Door Knocker Stainless Steel,Stainless Door Knocker,Door Knocker Hardware,Stainless Steel Knockers,Steel Fittings Manufacturer
Manufacturers and exporters of aluminum window hardware, door hardware, cabinet fittings which include door lever latches, door handles, knobs, knob handles, lever lock, bathroom door lock, door knockers, lever lock, lever latches, lever handles, door handles, door hooks, coat hooks, barrel bolts, handrail brackets, door bolt hardware, casement fastener and stays..
Manufacturer and exporters of brass, aluminium, black antique, ironmongery hardware fitting including door, window, cabinet hardware fittings which include Door Knockers, Door Locks, Antique Door Knockers, door knobs, lever latch, letter plates, Casement Stay, Sash Handle, stoppers, hinges and numerals.
Exporters, suplliers and manufacturers of ironmongery, black antique ironwork which include door bolts, door handles, ring gate latch, tee hinges, auto gate latch, padbolt protector, gate springs, hooks, reversible hinges, bow handles, hinge front, cupboard knobs, cabin hooks, butt hinges, door locks in zinc and stainless steel.
catalogs.eindiabusiness.com /stainless-steel-door-knockers.html   (1035 words)

  
 Tatet - shadow cabinet
Hardware Suppliers,Builder Hardware Fittings, Window Fittings, Door Fittings Suppliers, Cabinet Fittings Manufacturers, Brass Statues Exporters, Brass Hardware, Aluminium Hardware Fittings, Antique Hardware Fittings, Cabinet Fittings, Brass Cabinet Fittings, Aluminium Cabinet Fittings, Door Hardware Directory, Iron Hardware Directory, Auto Gate Latch, Door Bolts, Door Hinges Fittings, Ironmongery Manufacturer, Ironware Exporters
Kumar Metal Co Provides - Builder Hardware, Brass Door Hardware, Cabinet Hardware, Window Hardware, Lever Handles, Door Knockers Manufacturers Exporters Supplier Wholesalers India, Hardware Fitting Accessories, exporters of brass hardware, wholesale builder hardwares, door hardware, window hardware, cabinet hardware
: Alternate meanings in cabinet (disambiguation) A Cabinet is a body of high-ranking members of government, typically representing the executive branch.
www.tatet.com /search-shadow_cabinet.html   (1035 words)

  
 61734.991202&ELEMENT_SET=DECL
Locking bolts 20,24,30,32 and 34 can engage a variety of locking hardware installed in a door and which are used to lock the door, such hardware being very well known in the art, so no further description is necessary for the skilled artisan.
Although any number of locking bolts or latches may be employed in the present invention, in the illustrated embodiment mortise lock 10 includes a latch bolt 20 having an auxiliary latch 22, a rectangular bolt 24, and a dead bolt latch 26 which are configured to protrude from a faceplate 28.
As a further alternative, lock cylinders may be installed on both sides of the door which enable operating lock 10 by inserting a key into one of the lock cylinders, located on one side of the door, and turning the key to actuate latch bolt 20 and auxiliary latch 22, even
www.wipo.int /cgi-pct/guest/getbykey5?KEY=99/61734.991202&ELEMENT_SET=DECL   (4558 words)

  
 Hinge Manufacturers - B2B Manufacturer Directory Taiwan,China Hinge Manufacturers, Suppliers, Exporters
Main Products: Manufacturers of hardware- (1) latch and lock, gate latch locks, draw latch, drawbolt lock, suitcase locks, briefcase lock, luggage locks & hardware.
(6) fittings- pressure meter & meter valves, latch hinges, refrigeration solid, copper & brass products.
Hinge Manufacturers - Deng Tay Hwa Co., Ltd.
www.manufacturers.com.tw /hardware/Hinges-Manufacturers.html   (1373 words)

  
 Schlage
F10 Bel 605 Passage Lock Hardware > Doorknobs, Locks & Latches > Passage Locksets
F10 Geo 609 Passage Lock Hardware > Doorknobs, Locks & Latches > Passage Locksets
Backset Spring Latch Hardware > Doorknobs, Locks & Latches > Replacement Latches by Schlage
www.home-improvement-center.com /schlage   (813 words)

  
 Ice Box Hardware from Architecturals.net
ICE BOX HARDWARE Lid Lift Handle Overall - 5/8"h x 3"w x 5/8" proj.
Nickel Plated Cast Brass - Left Hand Ice Box Latch Drop Handle - 3-5/16"long x 7/8"wide Latch Base - 2-1/4"high x 1-3/32"wide Catch Base - 2-1/4"high x 7/8"wide Offset - 3/8"
Nickel Plated Cast Brass - Right Hand Ice Box Latch Drop Handle - 3-5/16"long x 7/8"wide Latch Base - 2-1/4"high x 1-3/32"wide Catch Base - 2-1/4"high x 7/8"wide Offset - 3/8"
www.architecturals.net /restore/home.cfm?page=products&SubCategoryID=61&CategoryID=38&subcat=y   (316 words)

  
 Company News On Call
STEC is the primary door latch actuator and rear compartment actuator supplier to Shanghai Volkswagen, China's largest sedan manufacturer.
The joint venture officially began its operations earlier this month, by imbedding STEC's existing door latch actuator business with Shanghai Volkswagen and door latch business with other Chinese domestic automotive manufacturers.
(STEC), a subsidiary of Shanghai Automotive Industry Corp. (SAIC), jointly announced here today that they have formed a joint venture for the manufacture of vehicle door hardware in China.
www.prnewswire.com /cgi-bin/stories.pl?ACCT=105&STORY=/www/story/12-15-1999/0001096857   (316 words)

  
 Fault-tolerant design of the IBM pSeries 690 system using POWER4 processor technology
If design analysis reveals that a chip function has ORed two different error checks, one with a single FRU domain and the other with a domain spanning two or more FRUs, the design is changed so that each such checker has a separate latch rather than sharing a latch with one or more other checkers.
Built-in hardware error detection and FRU isolation [ 1, 2 ] have been an integral feature of IBM mainframes beginning with the IBM 308X and continuing through the IBM 3090*, ES/9000*, and zSeries* systems.
During hardware chip development, the critical behavior is error detection within the individual error domains, the correct setting in logic of the FIR registers, and the driving of attention-notification signals to the service processor.
www.research.ibm.com /journal/rd/461/bossen.html   (316 words)

  
 Clock Granularity
In their system, for every event the hardware latch L is reprogrammed to generate the next interrupt exactly at the right time.
There are rounding errors in programming the hardware latch L and in updating system time.
For timer granularities of less than 1ms the error is about 2ms, for other granularities about 1ms.
wwwagss.informatik.uni-kl.de /Projekte/Squirrel/da/node5.html   (757 words)

  
 Southwest Power Fence & Livestock Equip - Livestock Watering Equip, Gate hardware
Kiwi Horse Gate Latch - 12" chain length, zinc plated.
Ring Type Horse Gate Latch -5" chain length, zinc plated.
Latch will release to allow gate to swing either direction.
www.swpowerfence.com /cat21.htm   (131 words)

  
 Child Passenger Safety Technical Encyclopedia
A standardized system of user-ready hardware in vehicles, consisting of two lower anchorages and one upper anchorage specified in FMVSS 225, for installing child restraint systems independent of the vehicle seat belt; popularly referred to as LATCH in the U.S. and similar to the Canadian Lower Universal Anchorage System (LUAS).
ISOFIX differs from LATCH and LUAS with regard to the child restraint in that only rigid lower attachments are allowed, and for both CRs and vehicles top tethers are not required.
LATCH has been phased into the vehicle fleet, but all passenger vehicles made from September 2002 must have the system in a certain number of seating positions.
www.carseat.org /Technical/tech_update.htm   (13611 words)

  
 Suffolk Latch, Suffolk Latch Manufacturers Suppliers Exporters
Exporters and manufacturers of iron hardware including Suffolk Latches, casement stay, doorbell buttons, tower bolts, door knockers, door bolts, drawer pulls, numerals, letter plates, escutcheons, cylinder pulls, aldrops, door handles, hinges and clavos.
: Door Handle, Door Knocker, Door Knobs, Door Plates, Door Latches,Iron Door Locks, Suffolk Latch, Ring Latch, Hasp & Staple, Locking Bar,Tee Hinges, Handrail Bracket, Riversable Hinge, Pull Handles, Tower Bolts,Cast Iron Hardware, Architectural Ironmongery, Door Plates, Numerals, Hooks,Cabinet Handles, Cabinet Knobs, Casement Stay,Brackets, Finials, Rossettes, Holdbacks, Curtain Hooks
: Door Handles, Door Knocker, Door Locks, Door Hooks,Cabinet Handles, Cabinet Knobs, Cabinet Fittings,Builder Hardware Items, Switch Plates, Letter Plates, Finger Plates,Mortise Locks, Cylindrical Door Locks,Bathroom Fittings
www.indianindustry.com /brasscopper/10990.html   (13611 words)

  
 Brass Door Hardware,Decorative Window Hardware Fittings,Antique Cabinet Fittings Exporters,Indian Builder Hardware Manufacturers,Black Antique Suppliers,Ironmongery Door Hardware India
H-2621 Auto Gate Latch BJPD Heavy 2 1/4"
H-2580 Safety Hasp and Staple ZP Heavy 6"
H-2579 Safety Hasp and Staple ZP Heavy 4"
www.tirupatiudyog.com /architectural-drawer-pulls.html   (13611 words)

  
 Door Knockers Exporters,Door Knockers Manufacturers,Door Knockers Suppliers,Door Knockers Traders
Manufacturer of door knobs, door handles, knockers, stoppers, escutcheons, chains, fasteners, latches, door stud, pulls, bolts, bell push, keyholes, locks, numerals, suffolk latch and other door hardware in brass, iron, wood and aluminum.
Manufacturer and exporter of door knockers, brass pull handles, aluminium handles, door locks, latches, door stoppers, door chains, sliding and tower bolts made of brass, iron and aluminum.
We supply and export door knobs, door handles, door knockers, door stoppers, thumb latches, door handles, letter plates, escutcheons, door studs, nails, door bolts, door hooks, door knobs and switch plates.
www.door-hardware-manufacturers.com /door-knockers-exporters.html   (1576 words)

  
 Multi sub-channel adapter with single status/address register - Patent 4495564
If the status is accepted by the host, the adapter 15 initiates a further interrupt, and the output of gate 49 sets a status cleared latch (not shown) to indicate that the status was cleared by a TIO command.
The local store 17 is comprised of a number of hardware registers used, for example, for the transfer of data to/from the channel and to/from the associated I/O devices.
In another aspect the invention provides an improved adapter which includes communication path means, for example hardware registers, passing data to and from the channel and attached devices, and a further hardware register of sufficient capacity to store a status word and an associated address.
www.freepatentsonline.com /4495564.html   (5539 words)

  
 FSB USA
FSB has produced door hardware for over a century, and is now one of the leading International architectural hardware manufacturers.
FSB mortise locksets are supplied with a US manufactured, ANSI standard (Grade One) UL listed (3 Hour) mortise lock or a UL listed (3 Hour) tube latch.
With our mortise locksets and tubular latchsets, FSB USA introduces North America to a wide range of European designed lever handles
www.fsbusa.com   (118 words)

  
 Shop DoItYourself.com for Deadbolts Single Cylinder Faultless Boxed Locksets Faultless Box Hardware at The Internets Largest Hardware Store for Home Repair and Household Products
Shop DoItYourself.com for Deadbolts Single Cylinder Faultless Boxed Locksets Faultless Box Hardware at The Internets Largest Hardware Store for Home Repair and Household Products
Deadbolts Single Cylinder - Residential Db Series Box Pack 6-Way Adjustable Latch - Pvd Anti-Tarnish Finish Finish=Lifetime Polished Brass Keying=Ka-3 =
- Our Warehouse Home - Hardware - Locksets Faultless Box - Deadbolts Single Cylinder Faultless Boxed - Items 1 thru 8 (of 8)
161.58.185.53 /store/deadboltssinglecylinderfaultlessboxed.htm   (118 words)

  
 UMX Catalogue - Designer Handbags, Purses, Cigar Boxes and Jewelry Box Making Hardware Supply
Latch: Cigar Box Purse, Wooden Boxes, Cigar Box, Box Purses, Wood Jewelry Boxes, Cardboard Paper Box, Gate, Window, Drawer, Cabinet, Door and Tool Box Latches Hardware Supplies.
Latches - Cigar Box Purse, Wooden Boxes, Cigar Box, Box Purse Latch
Cigar Box Purse Hinge, and Purse Chain Hanger
www.umx.info /purse-handbag-cat1.htm   (574 words)

  
 Lever Handles, Lever Handles Manufacturers Suppliers Exporters
Manufacturers and exporters of Lever handle, Lever latch, mortice locks, hinges, cabinet fitting, furniture fitting,knob, knockers, alphabets, numerals, letter plate, european statues, animal figures, vases, e.p.n.s.
Exporters of Knobs, lock sets, hinges, door knockers, door bells, push plates, Lever Handles and all types of door, window hardware etc.
Indian Industry » All Categories » Building Hardware » Lever Handles
www.indianindustry.com /hardware/6540.html   (1794 words)

  
 Technologic Systems TS-7200 SBC uses NetBSD OS to control Toaster
One relay is used to switch 110V to the burner element and one relay is used to switch 25VDC to the magnetic latch.
To engage that latch, one needs to know when the user is pressing the bread into the toaster which the TS-7200 reads with another sensor.
Though customers are not likely using toasters in their designs, they are likely encountering many of of the same issues such as GPIO control of hardware, custom software design/modification and dealing with tight spaces and high temperatures."
www.embeddedarm.com /news/netbsd_toaster.htm   (1107 words)

  
 Sherrer Tailgate Ramps
Remove the gate from the box and read the directions, in older models the original tailgate latch on both sides of the truck bed will need to be replaced with new hardware.
On the driver’s side of the tailgate there are two latches, the lower one holds your ramp together.
Next bolt into place the original equipment tailgate load straps, the Tailgate Ramp is designed to accept all original hardware.
www.atving.com /atvconnection/Sherrer-Tailgate-Ramps.cfm?cs_LoginTime=170911   (1107 words)

  
 LaForce » Glossary. LCN door closers, Von Duprin Exit Devices, panic device door hardware Global Norton Hager Schlage Yale
As used in exit devices, a mechanism that fastens the cross bar in the fully depressed position, and also retains the latch bolt or bolts in a retracted position, thus permitting free operation of the door from either side.
That leaf of a pair of doors that does not contain a lock, but is bolted when closed, and to which the strike is fastened to receive the latch or bolt of the active door.
A device combining a spring for closing and a compression chamber into which the liquid or air escapes thus permitting free operation of the door slowly, thus providing a means of controlling the speed of the closing action.
www.laforce-hardware.com /glossary.shtml   (3649 words)

  
 Device and method for programming critical hardware parameters - Patent 5220673
In particular, the rising edge of the internal write strobe in the WRSTBT line 66 is set by the trailing edge of the external write signal, and the trailing edge of the internal write strobe is used to latch internal registers.
Shortly after sensing the trailing edge of the strobe signal in the IOSTBT line 112 in conjuction with the CSBCR line 124 High, the delaying logic 125 issues a High End-of-write signal from its output 126 to the reset input of the SR latch 121.
When the internal write strobe, the WRSTBT 66 strobe, is issued, it passes through the AND gate 410 into the clock input 411 and latches data from the bus 62 into the register 71 with its trailing edge.
www.freepatentsonline.com /5220673.html   (8070 words)

  
 PalmInfocenter.com: palmOne SDIO Digital Camera Delayed, Rebranded
Even if all hardware makers began adding memory to their hardware SDIO devices it wouldn't satisfy the need to store and manage memory, apps, databases like the current slot is mostly used for.
While there is a latching notch on the SDIO mechanical form factor standard, not a single Palm OS device has a mechanical latch to lock down an SDIO card to keep "bump out" from happening.
Many trails of field use of Palm OS devices with SDIO attachments have failed due to the accidental removal of the SDIO device since it is "push-pull" to release.
www.palminfocenter.com /view_story.asp?ID=6302   (2661 words)

  
 Mechanical Breakdown Insurance
Master cylinder and seals; wheel cylinders and seals; disc brake calipers; power brake booster; hydraulic brake lines, fittings and valves; parking brake linkage and cables; anti-lock brake system: electronic control unit, wheel / speed sensor(s), valve(s), hydraulic unit, accumulator, modulator, and actuator(s); linkage and hardware (backing plates, caliper mounting pins, etc.).
Hood/door/hatch/trunk latches, cables hinges supports and springs; glove box/console lock and latch; ignition lock and tumbler; window regulators; seat belts; trunk and fuel door release cables or controls; T-Top latches; manual sunroof latch; mechanical seat tracks and springs.
All internal parts; transfer case mounts; shift linkage; electronic shift control module; sensors and switches; all wheel drive engagement module and actuator.
www.fairwinds.org /PersonalFinance/mbp_silv_plus.asp   (448 words)

  
 Cabinet Locks Desk Locks Keys Desk Hardware Restoration Hardware
Two function slam lock: slanted latch catches behind striker plate when door or drawer is pushed shut more details.
This solid brass lock comes with one key and is perfect for a small box and/or chest more details.
Locking plate for roll top lock more details.
www.vandykes.com /discount_den/1-12?PHPSESSID=ca8eaedc9596788177f9443f5001fad5   (190 words)

Try your search on: Qwika (all wikis)

Factbites
  About us   |   Why use us?   |   Reviews   |   Press   |   Contact us  
Copyright © 2005-2007 www.factbites.com Usage implies agreement with terms.