
	Where results make sense

Topic: Programmer (hardware)

Related Topics

Sooretama, ES, Brazil

Military Action Against Iraq (Parliamentary Approval) Bill

Delta Upsilon

Nokesville, Virginia

	The AVR Device Programmer Project
		Each development hardware add-on is accompanied by a piece of demonstration software which illustrates how the development hardware add-ons may be used as well as being useful in testing the construction of such add-ons.
		The device programmer hardware designs, the programming software and the development hardware add-on designs may be used by anyone, both for private and for commercial use, however none of the aforesaid must be used in the development of any program or application which relates to any of the following fields...
		You may redistribute the device programmer hardware designs, the programming software, the development hardware add-on designs, associated documentation and programming examples (as downloaded) providing that you do not charge anything more than a reasonable cost for the media upon which that redistribution is delivered.
	www.hippy.freeserve.co.uk /avr.htm (1920 words)

	Free discussion board about software, hardware, networks and networking
		This website has information on toms hardware - cabinet hardware, hardware store is not home hardware and this is the best resource on lowes hardware and search for door hardware, sears hardware, mountain hardware, true value hardware is not pc hardware into toms hardware guide, hardware review.
		This website has information on home hardware store and topics related to hardware via stainless steel hardware, hardware national, also known as home depot hardware store and antique door hardware, national hardware show, point of sale hardware and topics related to networks is the same as borland delphicartoon network search.
		Purchase sas programming, mountain hardware and america note network, true value hardware to php download, pc hardware of serial window xp, toms hardware guide needs 89c51 programmer, hardware review and topics related to window 2000, orchard supply hardware is cgi server, hardware driver, window, furniture hardware.
	www.nerdbrains.com (15346 words)

	Parallel / Serial AVR programmer
		This programmer is designed to program Atmel AVR microcontrollers in either parallel or serial mode, while connected to a host machine using RS232.
		Hardware is fairly minimal, but unfortunately, hardware documentation is at the moment especially poor.
		This programmer is sadly lacking in flashing lights, switches, buzzers, hooters, selftest routines etc. These shortfalls may well be addressed at some point (especially the flashing lights).
	homepage.ntlworld.com /fangorn/projects/avr/avrprogger.html (1636 words)

	PIC Programmer Software
		New Rev 3 Programmer PCB with 8,28,40 pin sockets and ICD connector.
		Specifically designed for use in factory in-circuit programming, and development of master/slave systems it supports many pics,and is easily extended to different hardware.
		New Hardware Types to be easily added with a few new macros.
	pp06.sourceforge.net (505 words)

	A Pulse Programmer for NMR: Hardware and Software Solutions (Site not responding. Last check: 2007-10-14)
		The core hardware design of the pulse programmer uses only two complex programmable integrated circuits and features a 20 ns timing resolution.
		The pulse programmer is programmed and controlled using a printer (parallel) port, and it can be attached to either a PC or a UNIX workstation.
		Its task is to communicate with both the client software and the pulse programmer; the server also performs all the necessary processing of the data.
	nersp.nerdc.ufl.edu /~marian/fac/progr_Berlin.html (540 words)

	P877 - A PIC16F877 Programmer And Development System (Site not responding. Last check: 2007-10-14)
		The programmer is parallel port driven, signals on port are first buffered by a 7407 and then applied to the proper MCU serial pins (RB6/RB7) to read/write or verify serial data.
		This programmer is a derivation of the well-known, public domain, Microchip AN589 application note and algorithm.
		Moreover, to be fully compatible with P877 software the programmer hardware should not invert the parallel port signals in any way.
	www.angelfire.com /ok3/masterbyte (1337 words)

	Pic Programmer by Myke Predko
		The features of this programmer includes very low cost, a large amount of independance from differing PC hardware as well as a diagnostic utility to help new builders successfully create their own programmer with a minimum of support.
		Many programmers take significantly longer than this due to data transmissions issues and explicit loops to ensure the application does not violate any of the programming specifications (for the 16F84, the programming operation of each word takes 10 ms).
		Commercial Universal programmers can be excellent, but tend to be quite costly (often $500 USD or more) and may not support new devices as quickly as the Microchip solutions.
	www.rentron.com /Myke4.htm (5999 words)

	Will.TheWisp.com - EPROM Programmer
		The programmer is driven from a parallel port, which supplies 8 data lines along with strobe and other control lines.
		For the purposes of the programmer, the 8 bit data from the parallel port is divided into 2 nibbles.
		The hardware and software described in this document may not be used in any manner that has been restricted by the disclaimer.
	homepage.ntlworld.com /rp_gamble/eprom (1395 words)

	The AVR Device Programmer Project - Device Programmer Hardware
		A crystal oscillator (XTAL1, C1 and C2) is included for the AT90S1200 processors which do not use an internal RC clock; the frequency of the crystal should be chosen to match the speed of the processor which you are programming.
		An external DC power supply (+5v maximum) may be connected to Pin 25 of SKT1 so that the processor may be used when disconnected from the PC; this would normally be the case when the Device Programmer is plugged into target hardware and the supply voltage is delivered from the target hardware itself.
		The Device Programmer is connected to a line printer port on the programming PC through a 25-way, Cannon-D, Male socket (SKT2).
	www.hippy.freeserve.co.uk /avrhardw.htm (602 words)

	lf352, Hardware: Programming the AVR microcontroller with GCC, libc 1.0.4 (Site not responding. Last check: 2007-10-14)
		Note that this is an improved programmer compared to the one presented in the March 2002 article.
		Note: the programmer presented here includes already the protection resistors which were build into the circuit board in the older hardware articles.
		To use the new programmer with the old boards you will just need to replace the protection resistors on the board by wires.
	www.linuxfocus.org /English/November2004/article352.shtml (2019 words)

	16F627 PIC Programmer Hardware and Software for Linux (Site not responding. Last check: 2007-10-14)
		This project grew from a 16C84 programmer that I built several years ago.
		The programming hardware has been used for programming 16C84, 16F84, 16F84a, and 16F627 chips without changes, The 16F627 has more configuration bits than the 16F84.
		The programmer hardware is a simple parallel port in-system prototype programmer, designed by Steve Marchant, which is a modified Microchip Inc. AN589 thing.
	members.shaw.ca /swstuff/16F627-programmer.html (228 words)

	Hardware Hints for DT001 SimmStick Programmer (Site not responding. Last check: 2007-10-14)
		You use the 18 pin flat ribbon cable and crimp connectors to jumper from the PIC programmer 18 pin socket to the PCB with the 40 pin socket on board.
		If you have the ITU Programmer with the 5 pin header, Chris's $25US special for an assembled unit to match his Programmer, complete with Aries ZIF socket and cable, has to be reasonable value.
		My programmer has a 100 ohm resistor in line with the 18 pin on board socket and a 100 ohm resistor in line when my PIGMY board is used for in-circuit programming via the 10 pin IDC header and the Load/Run switch.
	www.reflections.co.nz /micro/Boards/DT001/simmstick_hints.htm (3004 words)

	Hardware Debug page
		This page is about eprom programmer versions 4.0, 4.5, 3.1 PCB3B from Gitti Ieo is much the same but there are also a lot of differences.
		If Test Hardware fails check or the power supply and the connection cable are properly connected.
		At this point you can try to program an eprom,it's best to use an 28F010 or 020.The whole programmer hardware and Vpp will used this way and you can easily erase the chip with the programmer.
	www.willem.org /hardwdebug.htm (688 words)

	PIC Programmer
		Connected to your PC, the hardware part acts as an interface between the PC and the actual PIC chip package.
		The unprogrammed PIC may be plugged into the programmer hardware itself as in the picture above (though the ‘in situ’ lead would be removed then).
		Or you can plug the unprogrammed PIC into your project and then connect a lead between the programmer and your project (so the PIC socket on the programmer would be empty then).
	www.yorks8128.free-online.co.uk /G/pic01.htm (395 words)

	In-circuit 16F84 Programmers
		Unfortunately, because they will be describing their own enhanced PIC programmer suite called the PIC Toolkit (to appear in the July 1998 issue) EPE weren't very interested.
		The pins RB6 and RB7 are reserved for use by the programmer hardware but could be used by the target too under some circumstances.
		The programming hardware is based on the quick-and-dirty approach but the serial port versions are more conservative than most in that they don't try to obtain the programming voltage (VPP) from the serial port itself.
	www.ubasics.com /adam/pic/icp84.html (643 words)

	SuperVGA/VESA programmer's notes.
		Programmers have to write routines to detect (or ask the user:-p) which card is present, and then write card-specific routines to handle the graphics routines for that card.
		They defined a new standard programmer's interface so that programmers would only have to write one set of graphics routines for SuperVGA.
		Make sure you specify the VESA VBE 1.2 standard (for VGA BIOS extensions), or the VESA Programmers Toolkit, as VESA also has standards for the VESA Local Bus, an audio interface, power management signalling, and others, all of which are "VESA standards".
	www.faqs.org /faqs/pc-hardware-faq/supervga-programming (2543 words)

	Xerox90 Programmer
		The programmer works with any hardware (but with some limitations - see requirements to the hardware) which can be connected to the COM port of a computer.
		If you have any programmer Serial EEPROM for COM port it means most likely you have already had the hardware for the programmer.
		I would like to ask all people who have downloaded or bought the programmer (and other well-wishers) to send me the dumps of the chip xerox90 (even if the chip was read by the "uncorrect" programmer and all its data are destroyed after reading).
	xerox90.150m.com (1544 words)

	F84 Programmer
		Some PIC programmers can be used for in circuit programing, some provide many PIC chips including eeprom, say.
		The button shown in the hardware settings can be used to set or clear the desired bit manually for checking hardware.
		The hardware of F84 programmer can also be used with EPICWin without any circuit modifications as well.
	www.kmitl.ac.th /~kswichit/f84/f84.htm (339 words)

	Programming a Spider's Brain
		Sp12 version 2.1 is a serial mode (in-circuit) programmer for the AVR family of microcontrollers.
		Sp12 is one of the few programmers capable of uploading new software to several uCs on a single target, in one go.
		The programmer software is available under the GNU General Public Licence.
	www.xs4all.nl /~sbolt/e-spider_prog.html (2604 words)

	Atmel 89 Series Flash Programmer Ver 3.0 (Site not responding. Last check: 2007-10-14)
		This ISP Programmer can be used either for in-system programming or as a stand-alone spi programmer for Atmel ISP programmable devices.
		The programming interface is compatible to STK200 ISP programmer hardware so the users of STK200 can also use the software which can program both the 8051 and AVR series devices.
		Figure 2 shows the circuit diagram of the stand-alone spi programmer, the power to the interface is provided by the PC USB port which can supply a max of 100mA current.
	www.kmitl.ac.th /~kswichit/ISP-Pgm3v0/ISP-Pgm3v0.html (564 words)

	Los Angeles - Applications Programmer/Network Administrator (Site not responding. Last check: 2007-10-14)
		The Applications Programmer/Hardware Technician is responsible for programming and testing all security, network, and communication systems; providing technical and programming support to other departments as required; maintaining and refining existing procedures, programs and policies; staying abreast of new technologies and techniques concerning computer-related subjects, especially Personal Computers and PC networks.
		The Applications Programmer/Hardware Technician is responsible for maintenance of internal hardware used by Kastle for its operations.
		Ability to diagnose hardware problems on to the component or board level.
	www.kastle.com /la-appsprog-netadmin.htm (382 words)

	PIC Programmer hardware testing (Site not responding. Last check: 2007-10-14)
		Start by testing your programmer with the printer connector and PIC removed.
		Apply power to the programmer, ideally using a current limited power supply (100mA) or with a 100R resistor in series with VIN.
		The resistor acts a bit like a fuse is it will quickly burn out if there is a serious problem but should provide enough current to power the programmer if it's working properly.
	www.semis.demon.co.uk /Pics/PICtests.htm (338 words)

	Dontronics - ICSP PIC Programming and DIY Programmers Hardware test.
		The VDD pin of the PIC has to be connected to the programmer, and NOT connected to the VCC of the PCB, because the programmer does NOT have the power to power your PCB as well as the PIC.
		The new programmer will be the first to use the "Strategies" method, as outlined by suggestions earlier this month on the Forum.
		Since the older DIY programmers cannot NOT automatically upload instantly (it does not have the hardware to do so), we will encourage users to simply download relocatable ".o" files of each strategy so that they can "buildup" the PIC programmer firmware needed.
	www.dontronics.com /icsp.html (1348 words)

	ePanorama (Site not responding. Last check: 2007-10-14)
		Virtual programmers build embedded code - With shrinking software-development schedules and a growing shortage of skilled programmers, embedded-system designers are adopting automatic-code-generation tools to stay ahead of their competition.
		In PC hardware 640 kilobytes was allocated to memory on motherboard and rest of memory addresses were allocated for use with extension cards (for example the suplay cards and memory extension cards).
		The megabyte memory space was allocated in PC hardware in such way that 640 kilobytes was allocated to memory on motherboard and rest of memory addresses were allocated for use with extension cards (for example the suplay cards and memory extension cards).
	www.epanorama.net /links/microprocessor.html (11251 words)

	USBp Serial Device Programmer (Site not responding. Last check: 2007-10-14)
		The hardware and software described here allow the full range of operations on the serial interface, including programming, verification, chip read (dump flash), and chip erase.
		A document describing the hardware construction is provided in the Download section below, along with PCB masks and a complete parts list.
		The software loads the programmer with the appropriate firmware and then performs the appropriate action.
	norum.homeunix.net /~carl/usbp (888 words)

	Free Universal Programmer for hardware devices
		The aim is to use this software to program all programmable devices (microcontrollers, memories (Flash, EEPROM) etc) using the parallel port and a specific hardware interface.
		However, since the main idea is to make a collection of as many plugins and hardware interfaces as possible in order to implement programming for as many hardware devices as possible, some code skeletons and examples will be released, if this code can be of a wide interest.
		Insert the hardware interface and a special service will make available one, two or several drives with direct R/W access to the device (memory, MCU, etc).
	ssanos.tripod.com /thepageofsanos/id7.html (878 words)

	ELNEC - Developer's Tools :: PIKprog+
		The programmer performs device insertion test (wrong device position in socket) and contact check (poor contact pin-to-socket) before it programs each device.
		Programmer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help.
		Keep-Current service means, that ELNEC ships the latest version of programmer software and updated user documentation (Keep-Current package) to customer.
	www.elnec.com /pikprogplus.php (1090 words)

	Dual Pic Programmer
		The PIC programmer board described here was originally based on the program written by David Tait.
		As long as care is taken in the programmer software to avoid START and STOP conditions, the I2C devices will remain idle, and have no effect on programming.
		A bonus, is that the programmer can readily be used to initialise I2C ram,clocks, eeprom etc, as well as an ATE function for all.
	pp06.sourceforge.net /picp.html (1349 words)

	Glossary of Terms
		APM defines a layer between the hardware and the operating system that effectively shields the programmer from hardware details.
		DMI is hardware and operating system-independent, independent of specific management protocols, easy for vendors to adopt, mappable to existing management protocols such as the Simple Network Management Protocol (SNMP) and used on network and non-network computers.
		It is a variation of electrically erasable programmable read-only memory (EEPROM) that, unlike flash memory, is erased and rewritten at the byte level, which is slower than flash memory updating.
	www.ami.com /support/glossary.cfm (13219 words)

Try your search on: Qwika (all wikis)