Factbites
 Where results make sense
About us   |   Why use us?   |   Reviews   |   PR   |   Contact us  

Topic: Tag out


Related Topics

In the News (Wed 11 Nov 09)

  
  WFU | Facilities Management
Tag-Out Device: A prominent warning device such as a tag and means of attachment which can be securely fastened to an energy isolating device in accordance with an established procedure to indicate the energy isolating device and the equipment being controlled may not be operated until the tag-out device is removed.
Caution Tag: A warning device such as a tag and means of attachment used to warn employees of an existing or potential hazard.
Employee tags are mandatory and shall be used only for personnel protection; shall be clearly distinguishable from caution tags, and shall include a legend such as DO NOT START – DO NOT OPERATE, or a similar directive that informs employees working in the area not to start up the equipment.
www.wfu.edu /facilities/safety/lockout-tagout.html   (2192 words)

  
  OSU SAF 208: Lock Out Tag Out - Energy Control Program
When a tag is attached, it is not to be removed except by the authorized person responsible for it, and it is never to by bypassed, ignored, or otherwise defeated.
Tags and their means of attachment must be made of materials that will withstand the environmental conditions encountered in the work place.
Tags may evoke a false sense of security, and their meaning needs to be understood as part of the overall energy control program.
oregonstate.edu /dept/budgets/SAFManual/SAF208.htm   (733 words)

  
 Lock Out Tag Out for Equipment
Tag Out: Posting a prominent warning tag with durable string onto the energy isolation device and/or lock out device of the piece of equipment, machinery or system being controlled.
Affected personnel who will be assigned to work on a locked out piece of equipment, machinery or system including working in a controlled area, must be provided with his or her individual padlock and warning tag.
In addition, Affected Persons who will be assigned to perform a work task on the locked out piece of equipment, machinery or system, including working in a controlled work area, must know how to install his or her own individual padlock and warning tag.
www.virginia.edu /uvapolicies/Policies/SEC-025v1.html   (1383 words)

  
 TAG OUT   (Site not responding. Last check: 2007-10-26)
Tag was first played by the ancient Egyptians and has been played at recesses for thousands of years.
Sure, these have always been problems that plagued tag, but during my time as a whippersnapper we were able to play around it.
First, you should be tagging people strong enough that they aren’t in a position to even entertain the idea of a tag back, let alone be able to pull it off.
www.sportsrant.com /tag-out-a29871.html   (860 words)

  
 Lock Out/Tag Out Management Plan :: Occupational Safety :: EHRS
Authorized Employee is an employee who locks out or tags out machines or equipment in order to service or maintain them.
Tagout is the placement of an attachable tag on an energy-isolating device to indicate that the energy isolating device and the equipment being controlled may not be operated until the tagout device is removed.
Tagout Device is a prominent warning device, such as a tag and a means of attachment, which can be securely fastened to indicate that the energy isolating device and the equipment being controlled may not be operated until the tagout device is removed.
www.ehrs.upenn.edu /programs/occupat/lockout_tagout.html   (865 words)

  
 Tekken Zaibatsu - Tekken Tag Tournament - System - Tagging
Other tags such as grounded tags, stunned tags, juggle tags and even tag throws are completely off limits for this team.
There is one way to get around the morph tag however, if you manage to run under the opponent after a juggle starter you will be able to execute a regular standing tag.
This refers to moves that can be done by the character running in after a tag, not the character running out of the screen.
www.tekkenzaibatsu.com /tekkentag/system_tagbasics.php   (665 words)

  
 Tag-out Information
The absence of a tag or label may not be taken as permission for unauthorized operation of equipment.
Whenever a tag or label is issued, correct the situation requiring the tag or label so it can be removed as soon as possible.
Use enough tags to completely isolate a section of piping or circuit being worked on, or to prevent the operation of a system or component from all stations that could exercise control.
www.tpub.com /engine2/en2-10.htm   (837 words)

  
 UVA/OEHS Lock Out Tag Out (LOTO) of Hazardous Energy Sources   (Site not responding. Last check: 2007-10-26)
Personal padlocks, warning tags and lock out devices must be provided by the department and assigned to Authorized Personnel.
Lock Out Tag Out (LOTO) procedures must be written down in an easy to understand step by step sequence that accounts for the safe Shut Down of all hazardous energy sources including stored energy.
All personnel participating in a "group lock out" must be trained on the LOTO procedure and the special "group lock out" procedures.
keats.admin.virginia.edu /os/loto.html   (1406 words)

  
 Logout Tagout Policy   (Site not responding. Last check: 2007-10-26)
When a tag is attached to an energy isolating means, it is not to be removed without authorization of the authorized person responsible for it, and it is never to be bypassed, ignored, or otherwise defeated.
Tags must be legible and understandable by all authorized employees, affected employees, and all other employees whose work operations are or may be in the area, in order to be effective.
Tags may evoke a false sense of security, and their meaning needs to be understood as part of the overall energy control program.
www.columbia.edu /cu/ehrs/LockoutTagoutPolicy.html   (4357 words)

  
 Amherst College Commencement
The equipment, machinery and processes must be locked and /or tagged out to protect against accidental or inadvertent operation that might cause serious injury or fatality.
The bottom ½ of the perforated tag must be returned to the supervisor after the tag has been affixed to the energy isolating device for future reference.
Blocks, chains, fasteners, locks, pins, tags and wedges can be used to isolate, secure or block the equipment, machine or processes from their respective energy sources.
www.amherst.edu /~ehs/programs/Safety/LockOutTagOut.html   (3448 words)

  
 Baseball and softball running, force out, and tag out
When the batter-runner is not at risk of making an out, any runners that he forces to move are also not at risk.
Note that there may be one or two runners who are not forced to do anything when a batter-runner is forced to go to a base, simply because no other runner is being forced to occupy those runners’ bases.
If a runner leaves his base before a fly-ball is caught, the defense can either force him out or tag him out.
mysite.verizon.net /dqk/baseball-rules/run2.html   (760 words)

  
 Tag-Out Procedure   (Site not responding. Last check: 2007-10-26)
A lockout device and universal "Danger" tag shall be placed on all energy-activating devices of machines or tools needing repair, or receiving routine maintenance.
The responsible trade should write the reason(s) the machine is not operable on the tag and sign it before placing the tag on the equipment.
A lockout device and tag shall be placed on the junction box of stationary permanently-wired equipment with the energy activating device placed in the "off" position.
www.pp.okstate.edu /ehs/MANUALS/PPSAFETY/Tagout.htm   (214 words)

  
 Env. Health and Safety   (Site not responding. Last check: 2007-10-26)
Lock out and tag out all energy devises by use of hasps, chains and valve covers with an assigned individual lock.
If the task is re-assigned to the next shift, those employees must perform a review of the lock out/tag out procedure with the previous technician before they may transfer their lock, key and tag.
In the preceding steps, if more than one technician is assigned to a task requiring a lock out and tag out, each must also place his or her own lock and tag on the energy isolating device(s).
www.fgcu.edu /EHS/HazardousEnergyControls.html   (1156 words)

  
 [No title]   (Site not responding. Last check: 2007-10-26)
An employee who is undergoing on-the-job training and who, in the course of such training, has demonstrated an ability to perform duties safely at his or her level of training and who is under the direct supervision of a qualified person, is considered to be "qualified" for the performance of those duties.
If the tag cannot be affixed at that point, the tag will be located as close as possible to the device in a position that will be immediately obvious to anyone attempting to operate the device.
Lock and tag out all energy devices by use of hasps, chains and valve covers with an assigned individual locks.
medical.smis.doi.gov /locktag.doc   (1722 words)

  
 W3C Technical Architecture Group (TAG)
W3C has created the TAG to document and build consensus around principles of Web architecture and to interpret and clarify these principles when necessary, to resolve issues involving general Web architecture brought to the TAG, and to help coordinate cross-technology architecture developments inside and outside W3C.
The TAG is chartered for an indefinite duration.
If the TAG are not engaged in the particular discussion, give serious consideration to the likelihood of your posting being ignored.
www.w3.org /2001/tag   (976 words)

  
 LASERTRON laser tag equipment | Manufacturers of Interactive Entertainment
It is important to understand that the very best professional laser tag operators have the ability to put 90% of all the existing laser tag facilities out of business within 12 months of opening a new professional high-end laser tag center within the same market area.
It is also important to note that a successful laser tag center that developed a facility 80 to 90% right is just as vulnerable to a professional laser tag operator as a low-end center developed 50% right.
A professional laser tag operator recognizes the true value of a large multi-level arena that is extremely durable.
www.laser-tron.com   (2862 words)

  
 Lockout Tag Out
Procedures and reasons for using Lock Out/ Tag Out are shown.
Who should be a authorized to do it and undo it are discussed as well as when and why needed.
Equipment scheduled to be worked on needs to be “Locked Out” and/or “Tagged Out” so that it will not “operate” while it is being maintained or serviced to protect those performing that work.
www2.triangle.coop /Default.aspx?tabid=226   (79 words)

  
 Lock out/Tag out - Mike Holt's Code Forum
NO!" Can anyone give me a reference to NEC, NFPA 70E, or other, that specifically states that the person who is actually working on the equipment is the one with sole responsibility to perform the LOTO or at least apply their personal lock with the Maintenance Dept.'s.
I definetly feel this is a good work practice and should be employed into the LOTO procedures, however, if the company has a documented and established procedure otherwise, I think it is compliant with minimum safety requirements.
My point is that they can't stop you from putting your own lock on while you are working on the equipment, and if they wouldn't let me do that, they would be looking for another contractor, because I won't let any of my guys work without having their own lock on the equipment.
www.mikeholt.com /code_forum/showthread.php?t=69185   (662 words)

  
 Lock Out or Tag Out — Take the Time to Save a Life!   (Site not responding. Last check: 2007-10-26)
Ideally, a tag will be placed in conjunction with the lock, containing specific instructions with the signature of the person who has tagged it.
Tags must be legible and understandable and are not to be removed, ignored, or bypassed, Gribow says.
Each individual is responsible for his or her own safety and only the worker who installs a lock and tag should remove it after work is complete and inspected.
www.scfaz.com /publish/article_647.shtml   (1112 words)

  
 UC Santa Cruz - Environmental Health and Safety - Safety - Lock-out Tag-out
Affected employees are people who may be affected by or work near equipment which is locked or tagged out.
They identify energy sources, provide step-by-step instruction for locking or tagging out energy sources, releasing stored energy, and verifying the equipment cannot be re-started after lockout is applied.
Tags should include your name, department, how to reach you, the date and time of tagging and the reason for the lockout.
ehs.ucsc.edu /safety/lockout_tagout.php   (536 words)

  
 Lock Out Tag Out   (Site not responding. Last check: 2007-10-26)
Affected personnel shall be notified by authorized personnel whenever an energy isolating device in their area is being lockout out and shall be instructed about the procedure and the prohibition relating to attempts to restart or re-energize the machines or equipment that are locked out.
Affected personnel shall be notified by authorized personnel whenever an energy isolating device in their area is being tagged out and shall be instructed about the procedure and the prohibition relating to attempts to restart or re-energize the machines or equipment that are tagged out.
The tag may then be removed only by the individual authorized employee who placed the tag on the energy isolating device.
www.cbl.umces.edu /Resources/SafetyManual/LockOutTagOut.html   (1701 words)

  
 Flickr: Photos tagged with tag
Brady's selection of tags are available to solve your valve, equipment, and accident...
Tags and tag supplies: many styles and sizes for shipping and retail.
Tags help you find photos which have something in common.
www.flickr.com /photos/tags/tag   (137 words)

  
 Lock Out/Tag Out (LOTO) Program
If more personnel are asked to work on a piece of equipment, then each will apply his or her lock to the appropriate control.
Before carrying out any further work on the equipment, the trades staff or contractor will test the equipment to ensure that it is in fact de-energized.
The person removing the last lock will only do so when he or she is satisfied that it is safe to re-start the equipment.
www.mcgill.ca /ehs/plant/loto   (500 words)

  
 Lock-Out/Tag-Out
Approximately 10% of all incidents in the workplace are the result of a failure to control energy.
In a typical scenario, tasks that are perceived as a quick “in-and-out” situation will have Lock-Out / Tag-Out procedures neglected.
Although it does take a few minutes to lock out a machine appropriately, with proper education and good procedural guidelines, Lock-Out / Tag-Out can become an ingrained practise for workers.
www.itd2.com /newsletter/Oct03/lock-out_tag-out.htm   (591 words)

  
 Lock-Out/Tag-Out Hints on LOTO Tag Design, Lock-Out/Tag-Out Regulations, OSHA 1910.147, Lock-Out Tag Materials, ANSI ...
Should the tag have a perforated stub, or a paper office copy?
How do I remove the tag after the job is complete?
Can tags be used in place of locks in a lock-out program?
www.electromark.com /help/LOTO/lockouttagout_faq.asp   (162 words)

  
 Lock and tag - Wikipedia, the free encyclopedia
Identification must include the name of the person doing the lock and tag and a contact phone number.
Many sites have the officially stated policy that only the person who tagged the device can untag it.
Giving approval for the removal of a tag over the phone is not an option.
en.wikipedia.org /wiki/Lock_and_tag   (785 words)

  
 UMass Amherst: Environmental Health and Safety
Tag-Out: Placement of a tag on an energy isolating device that indicates that the energy isolating device and the equipment being controlled must not be operated until the tag has been removed by the qualified person who initially installed it.
The tag shall be a two part, perforated tag with the word "Danger" prominently displayed.
All affected, authorized, knowledgeable persons, upon observing a piece of equipment, machine or process which is locked out shall not attempt to start, energize or use the equipment or machine.
www.ehs.umass.edu /loto.html   (3278 words)

  
 Lock out Tag out Kits, LOTO, MSDS, OSHA Lock Out Tag Out Products
Lock out Tag out kits, OSHA compliance information, MSDS forms and materials, Lock Out Tag Out Forms and Lock Out Tag Out Kits
Lock and tag or lock-out tag-out is a safety procedure which is used in industry and research settings to ensure that dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work.
Lock out tag out kits, LOTO, MSDS and OSHA compliance products at affordable prices.
www.nwmedicalsolutions.com /cat_lockout.cfm   (246 words)

  
 SM 445-2-H CHAPTER 37
Machines, equipment, and instrumentation will be isolated from all potential energy sources before an individual performs any servicing or maintenance activities if the energizing, start-up, or release of stored energy could cause harm to the individual working on the machine or equipment.
These individuals will be instructed about the procedure and the prohibition against restarting or reenergizing machines or equipment which are locked out or tagged out.
To ensure the continuity of lockout or tagout protection when shifts or personnel change, the incoming personnel will place their lock(s) and/or tag(s) on the equipment prior to outgoing personnel removing their lock(s) and/or tag(s).
www.usgs.gov /usgs-manual/handbook/hb/445-2-h/ch37.html   (1668 words)

  
 Lock Out Tag out Training Module
Lockout/Tagout Training: OSHA Regulation CFR29 - 1910.147 requires employers to provide employees who "service or maintain equipment or machines" training in the control of hazardous energy that could result in injury to the employee when unexpectedly released.
Please contact your supervisor or the person asking you to take this training for the phone number to contact the designated person.
If you use the capaea password you will be charged $20 at the END of your training.
www.aea11.k12.ia.us /prodev/mandatory/loto   (437 words)

Try your search on: Qwika (all wikis)

Factbites
  About us   |   Why use us?   |   Reviews   |   Press   |   Contact us  
Copyright © 2005-2007 www.factbites.com Usage implies agreement with terms.